What is Distance Between Mounting Holes of Dexter A-60 Coupler
Question:
I am adding surge disc brakes on a LoadRite boat trailer with torsion suspension and single 6000lb axle. Would a DX56FR mount on tongue using existing holes spaced 3 inches apart? I also want manual lock out in addition to wired lockout. I would also want shortest actuator possible due to length restrictions in garage. Would standard brake line kit work on this trailer? Axle is bolted to frame.
asked by: Neil M
Helpful Expert Reply:
The distance between the mounting holes of the Dexter coupler part # DX56FR is 3 inches so it would bolt right up to your trailer. For a manual lockout you could use with this you'd want part # DX94FR. Standard brake line kits like the part # DM5424 would work just fine.
(click to enlarge)
Products Referenced in This Question
Demco Hydraulic Brake Line Kit for Single Torsion Axle Trailers - Drum or Disc Brakes
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 15 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Single Axle
- Demco
more information >
Replacement Consumer Lockout Key for Dexter Axle Brake Actuators - Qty 1
- Accessories and Parts
- Brake Actuator
- Hydraulic Drum Brakes
- Lockout Key
- Dexter
more information >
Product Page this Question was Asked From
Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- Disc Brakes
- Electric Lockout
- Dexter
more information >
Continue Researching
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Q&A: Recommended Front Hitch for a 2022 GMC Sierra 1500
- Video: Review of Dexter Axle Brake Actuator - Surge Brake Actuator with Reverse Lockout - DX56FR
- Shop: SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Underslung
- Shop: 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 4" Long
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Search Results: trailer tongue
- Search Results: dx29fr
- Search Results: dx56fr
- Search Results: surge brake actuator
- Q&A: Surge Brake Actuator Recommendation for 2002 Load Rite Dual Axle Bass Boat Trailer
- Q&A: Will The DeeMaxx Disc Brake Caliper Work as a Replacement With Tie Down Disc Brakes?
- Q&A: Replacement Calipers for TDE 46304 on 2012 Tandem Axle Boat Trailer
- Q&A: Is Dexter DX7.5L DX29FR Designed To Mount Inside Of 3" x 4" Trailer Tongue?
- Q&A: Can I Weld on a Bolt on Brake Actuator?
- Q&A: What is Difference Between Dexter Couplers # DX29FR and # DX56FR
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Most Popular Wheel Bearings
- Search Results: leaf spring
- Search Results: equalizer
- Article: Trailer Tire Sizing
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Straight Tongue Trailer Coupler
