Surge Brake Actuator Recommendation for 2002 Load Rite Dual Axle Bass Boat Trailer

Question

Question:

I have a 2002 Load rite dual axle bass boat trailer. I need a new actuator with the lock out solenoid. Please let me know what brand/model would work for this trailer

asked by: William J

0

Expert Reply:

The Dexter DX7.5L # DX56FR would be a great actuator replacement for your 2002 Load Rite dual axle bass boat trailer. This would easily work on a tandem axle disc brake setup like it sounds like you have on your trailer.

expert reply by: Jameson C

0

Answer 1

The DeeMaxx item #DE86VR won't because of the spacing on the mounting bracket but I have a caliper that will. To replace your Tie Down Engineering 46304 caliper you will need the Kodiak Disc Brake Caliper item #KDBC225DAC.

view full answer...

Answer 2

From what we have found in the past, the TDE 46304 calipers are for 9.6", 10" or 12" rotors. Assuming you have the 10" or 12" rotors you can use the Kodiak Disc Brake Caliper #KDBC225DAC as a replacement.…

view full answer...

Answer 3

The difference is the trailer tongue size the coupler was designed to fit. The part #DX29FR is designed to fit a 3 inch by 4 inch straight tongue whereas the part #DX56FR is designed to fit a 3 inch by 5 inch straight tongue. Aside from that they…

view full answer...

Answer 4

Yes, you can weld on the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K item #DX56FR you referenced. You will want to make sure you remove the zinc coating and get down to the bare metal. I…

view full answer...

Answer 5

It sounds like either the Dexter DX7.5L A-60 Brake Actuator for Disc #DX56FR or Drum #DX83FR brakes is going to be the best replacement option. According to the information I could find from ShoreLandr your trailer does use a 3" wide by…

view full answer...

Answer 6

The Dexter Actuator Inner Member part #DX99FR is designed as a replacement center section for the Dexter DX7.5L A-60 part #DX56FR which was designed to fit a 3 inch wide by 5 inch tall straight trailer tongue. If you are looking for a coupler…

view full answer...

Answer 7

Yes, the Dexter actuators part #DX29FR and #DX27FR are interchangeable and either could be used in place of the other. The mounting patters are exact same.

view full answer...

Answer 8

Yep, you got it, the bolt hole dimensions are 3" x 2-1/2" for the Dexter DX7.5L A-60 Brake Actuator For Disc Brakes #DX29FR. This fits over a 3" x 4" tongue and the ball to opposite end length you stated does not matter, no.

view full answer...

Answer 9

The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX29FR would work for you as it's for disc brake trailers and can fit a 3 inch wide trailer tongue like you have.

view full answer...

Answer 10

There are a couple potential options to replace a model 70LP low profile actuator, depending on if you have drum or disc brakes: - Drum: Dexter Brake Actuator #T63FR - Disc: Dexter DX7.5L A-60 Brake Actuator #DX29FR The #T63FR mounts to a 3"…

view full answer...

Answer 11

We can get you a replacement for your TDE LP75 disc brake actuator; that's a 7,500 lb actuator that accepts a 2" hitch ball, and the correct option will depend on if your trailer tongue is 3" wide x 4" tall or 3" wide x…

view full answer...

Answer 12

We can get you a good replacement, though there is actually no longer a TDE brand. But that actuator is simply a bolt-on, 7,500 lb actuator that couples to a 2" hitch ball, and per the owner's manual does not have a lockout (so it is for…

view full answer...

Surge Brake Actuator Recommendation for 2002 Load Rite Dual Axle Bass Boat Trailer

Product Page this Question was Asked From

Continue Researching