Will Draw-Tite Max-Frame Trailer Hitch Fit 2024 Subaru Crosstrek Wilderness

Question

Question:

Will this fit a 2024 Crosstrek Wilderness?

asked by: Robert

0

Expert Reply:

The Draw-Tite # 76209 fits all models of the 2024 Subaru Crosstrek, including the Wilderness. If you have the hybrid then this hitch is the best and only choice. If you do not have a hybrid then I recommend the etrailer # e98912 instead. Unlike the Draw-Tite hitch, the etrailer hitch has a concealed cross tube so it has a cleaner look and gives you better clearance.

I see you also looked at trailer wiring. The T-One Vehicle Wiring Harness # 118467 fits non-hybrid models and is the most reliable option for a 4-way. This plugs into the connection point in your rear cargo area. It would also be required before upgrading to a 7-way with the # ETBC7.

If you're towing a trailer with brakes, I recommend the Redarc Tow-Pro Liberty Brake Controller # RED24FR. This is simple, reliable, and doesn't take up space in the cab of your vehicle. The main unit installs behind the dash so only the control knob is visible. The knob controls the braking power and acts as the manual override. You would also need the # RED69FR for installation.

In order to complete your setup you will also need a ball mount. Check out the etrailer Ball Mount Kit # 989900. This kit has two ball mounts, one with a 3/4" rise or 2" drop and the other with a 2-3/4" rise or 4" drop. It also comes with a 1-7/8" and 2" ball, as well as a ball mount bag to store everything in.

I have attached some review and installation videos below for your reference.

expert reply by: Robin H

0

Answer 1

The Draw Tite hitch part #76209 that you have installed on your 2018 Subaru Crosstrek was only tested with the factory exhaust of your vehicle. I attached a picture of what this hitch looks like installed relative to the factory exhaust. It would…

view full answer...

Answer 2

When we installed the Draw Tite Hitch part #76209 on a 2018 Subaru Impreza Wagon just like yours we found the height from the top of the trailer hitch opening to the ground measured 10 inches. So what you'll need to do is measure from the bottom…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...