Front and Rear Torklift Tie Downs that Fit 2023 Toyota Tundra

Question

Question:

Looking for camper tie downs for new 3rd Generation 2023 Toyota Tundra. I cant find any fit info on your site. Thx

asked by: Randy C

1

Helpful Expert Reply:

I checked with Torklift and for your 2023 Toyota Tundra we have the part # TL37CR for rear tie downs and part # TL57CR for the front.

expert reply by: Jameson C

1

Answer 1

The Brophy Clamp On Camper Tie-Downs part #HSAB are universal tie-downs used to secure a truck bed camper to a truck bed. They are universal because the manufacturer does not do any testing on specific year, make, and models. That said, we have…

view full answer...

Answer 2

The parts you're needing for your 2023 Toyota Tundra are the following from TorkLift: - Front #TL57CR - Rear #TL37CR

view full answer...

Answer 3

Yes, both the Torklift camper tie downs part #TL37CR and #TL57CR are a fit for the 2022 Toyota Tundra.

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 5

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory…

view full answer...

Answer 6

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 7

The current Torklift tie down part #TLD3101 that you have installed on your 1997 Dodge Ram 3500 only fits if you have the factory hitch. If you go with the SuperHitch part #TLD1100 you would need to change your rear tie down to the part #TLR3503.

view full answer...

Answer 8

The proper extension for your setup would be the one that allows you to have clearance of your hitch mounted accessory and also allows you to still be able to pull the steps down. If the receiver tube sticks out past the camper too far then you…

view full answer...

Answer 9

We do offer hitch extensions for the factory 3" trailer hitch receiver on your 2017 Ford F-350 Super Duty, but there is not one that is 24" long. The shortest extension available is the TorkLift Cannon Hitch Extension - 3"…

view full answer...