TorkLift Rear Frame-Mounted Camper Tie-Downs Installation - 2020 Ford F-250 Super Duty Video

Rhino Rack has aero bar roof racks that fit directly to the Lance camper shell roof tracks you have now with the part #Y02-480B-NT for a 54 inch long crossbar or part #Y02-490B-NT for 59 inch bars. This would be an easy and great option to add a roof…

Hey Chip, so we do have a set of Torklift camper tie downs that fit your 2024 Ford F-350 long bed with side steps and a factory hitch with the part number #TL87CR for the front set and part #TLF3008 for the rear set.

For your Lance 855s Camper with standard tracks I recommend the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 #RRRLT600 and then crossbars like the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black -…

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

For the Maggie Rack on your vehicle we will need to go with a different direction other than the Inno Feet #INXP that you referenced. I reached out to my contact at Inno who said that these are a bit more specific in what they fit and they won't…

I recommend using 4 sets of the Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT for your application. This comes with 2 of the crossbars, legs, and pad setups so it's more cost-effective than piecing out everything, plus the crossbars and…

The hitch plate of the Torklift Tie Down part #TLF3008 when tightened down holds the tie down securely in the hitch tube by putting tension in it so that it can slide out.

For your 2017 Ford F-350 with factory hitch, running boards that stop at the cab and a short bed you would want the Torklift Camper Tie Downs part #TLF2022 and #TLF3008 which are a confirmed fit for that setup and would work well.

Yes, I checked with Torklift and for your 2017 Ford F-350 diesel with an 8 foot bed, factory hitch, and full length running boards the correct tie downs are the #TLF2021 and #TLF3008 that you referenced!

We have the TorkLift Cannon Hitch Extension for 3" Ford Super Duty Factory Hitch #TLE1642. You will not be able to use an extension of this length with a rise hitch adapter. This is because the 42" hitch extender has to be secured with…

We do have an electric option available that may work for you. The HappiJac Electric Truck Camper Jack System #LC736514-ELKIT will have a higher capacity of 8,800 pounds, but does only have 34-1/2 inches of lift. This will also include the mounting…

Of the two part numbers you mentioned only the #TLF2022A is a fit for your 2022 Ford F-350 short bed without factory board and with the factory installed hitch. You might have meant to type #TLF2022 which is the non-aluminum/stainless steel option…