Double-Eye Springs Wet Equalizer Bolt Installation Video

The MORryde CRE3000 part #MR27ZR that you referenced was designed for 35 inch wheelbases like you have so it's for sure going to work. Since you have the 3-1/8 inch shackle length currently the correct shackle kit you'd need is the part…

Good question, and what happens is that leaf springs elongate over time, and since you mentioned you got measurements of 25-1/2 inches from center eye to center eye and 26 inches under partial load, the best option for leaf springs really is the…

To slightly lower your trailer that has had an "axle flip" kit installed you would want to use slightly shorter shackle straps, not longer ones. Shorter shackles will let the axle rest closer to the trailer frame, which lowers the trailer…

The first thing I would check on your trailer is the capacity of the springs. You need to be sure the spring capacity is rated at 1/2 the axle capacity. That way 2 springs equal the capacity of the trailer axle for proper fit. Check the arch of the…

The equalizers that come with the Dexter Heavy-Duty Suspension Kit #K71-448-00 have bolt holes that measure 6" apart on center and then 4" tall on center as you can see in the attached photo. You'll want to measure your current…

Based on the dimensions you mentioned the correct Dexter EZ Flex kit you would need is the part #K71-654-00 which is compatible with what you have and will do a great job improving ride quality.

Thank you for providing a photo of your trailer shackle straps showing the extra non-threaded portion of the Redline zerk-fitted bolts #126B2. Shackle bolts are intended to have a fairly loose fit with the shackle straps when installed properly. This…

Generally when replacing shackles, we do want to keep them the exact same size as the stock shackles. Any difference in length can throw off the suspension - especially on triple axle setups. The most common shackle sizes are 2-1/4" long or…

For your application I recommend using the 4-Leaf Slipper Spring w/ Hook End for 4,000-lb Trailer Axles #SP-230275. This measures 26-5/8" to the end of the spring but if you check out the attached photo you'll see that it will fit great with…

The brake assembly and brake hub will not meet flush, but they will be close. I would double check that you have the correct parts and that all races and seals oriented correctly and fully seated. Then reassemble and tighten crown nut down until…

The Replacement 5-5/8" Equalizers for E-Z Flex Heavy Duty Rubber Suspension System #K71-654-00 you referenced are simply replacements for the E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle - 5-5/8" Equalizers #K71-652-00. To…

Yes, the Replacement 5-5/8" Equalizers for E-Z Flex Heavy Duty Rubber Suspension System #K71-654-00 will work for your trailer since the dimensions match with your current equalizers. These will work with axles up to 6,000lbs. I believe the kit…