Customers compare LC64FR to these similar products
Products Featured in this Video
Today, we're going to take a look at the Lippert Components Tandem Axle Equa-Flex Attaching Parts Kit. Now this hardware kit will upgrade your tandem axle trailer suspension. Replaces the shackle assemblies, the wet bolts, and the nuts on your trailer's tandem axle suspension. And it is designed to work with 3000-lb to 8,000-lb Equa-Flex equalizers, which we do sell separately on our website.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Yes, the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps #MR76ZR will fit with the Equa-Flex system on your Grand Design.
view full answer...Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…
view full answer...The Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 2-5/16" #LC126238 has a 7/16"-20 fine thread.
view full answer...Nope, heavy-duty shackle straps are either 2-1/4" or 3-1/8", so the closest heavy-duty shackle strap to 2-3/4" would be the the 3-1/8" long, 1/2" thick Dexter Heavy-Duty Shackle Link #DX55FR. This option will still work for…
view full answer...From the measurements you provided, the Lippert Road Armor #LC696740 is going to be the better option. You will also need the #LC64FR to complete it. This will include wet bolts and all shackles, but they will be a little shorter at 3 1/8 inches.
view full answer...The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.
view full answer...The shipping weight of the B&W Companion OEM 5th Wheel Hitch #BWRVK3305 is 152 lbs so it will be just under that after you remove the packaging. Although it is still pretty hefty, the head unit part #BWRVC3006 can easily be removed off of the…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Since your Grand Design 17MKE has a GVWR of 6,395 lbs, you more than likely have 3,500 lb axles. That being the case, the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2560 will not fit your travel trailer. Although Roadmaster does not…
view full answer...The MORryde Shackle Upgrade Kit for Tandem Axle Trailers w/ 2-1/4" Shackles & Correct Track #MR58ZR you were looking at may work on your 2018 Highland Ridge Travel Trailer 322RL with Lippert 5200LB axles and the correct track alignment/lift…
view full answer...Thanks for the information! The Equa-Flex 145545 you have is the Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 6K to 8K #LC279688. Since you measured your shackle straps and found they are 3-1/8" center to center of the…
view full answer...You shouldn't loose any wheel clearance with the Dexter E-Z Flex Suspension Kit. First you will want to see which of the Equalizers you need. There is a 6,000lb Equalizers #K71-654-00 (5-5/8") and 8,000lb Equalizers #K71-655-00…
view full answer...