How is the 30-20 Hanger Designed For Mounting On Its Side and Not Facing Down
Question:
WHATS THE PURPOSE OF WELDING THIS ON THE SIDE NOW INSTEAD THE WAY IT USE TO BE WELDED WITH THE OPENING FACING DOWN?
asked by: JEFF J
Expert Reply:
The hanger part # 30-20 is an unusual hanger in that it is recommended you attach the side of it to the trailer frame unlike most that use the other side and face "down". It is also unusual in that it has a bushing that comes with it and that the straps also attach to the outside of it.
If you look at the hole of the hanger you can see that it isn't centered from top to bottom. Hangers that normally install facing down have the mounting hole centered there. I attached a picture that shows this as well.
Product Page this Question was Asked From
Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 2-1/8 Inch Tall
- Single Axle
- Dexter
more information >
Continue Researching
- Shop: Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
- Shop: Dexter Single-Axle Trailer Hanger Kit for 3" Slipper Springs - 6-1/4" Front
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: 6-Leaf Double-Eye Spring for 5,300-lb Trailer Axles - 24-7/8" Long
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Shop: Suspension Enhancement
- Search Results: shackle strap
- Search Results: 3500 lb axle and spring kits
- Q&A: How To Mount Redline Rear Hanger # 30-20 On A Trailer
- Article: Double-Eye Trailer Suspension System Review
- Shop: Trailer Hitch
- Search Results: 30~20
- Search Results: aps5
- Search Results: timbren
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: What is Typical Trailer Leaf Spring Deflection
- Search Results: aps1
- Q&A: Differences in the Redline Single-Axle Trailer Hanger Kits, # APS1, #APS2, and # APS3
- Q&A: Outer Diameter of Bushing on Suspension Hanger Part # 30-20
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 30-20 Review
- Q&A: How Does the Rear Hanger Get Welded to the Trailer Frame
- Q&A: Spring Hanger Dimension Recommendations for Installing a e34SR Leaf Spring
- Video: Dutton-Lainson Sidewind Swivel Trailer Jack Review
- Search Results: 25 1 4 leaf spring
- Article: Where to Position the Trailer Axle?
- Video: Firestone Ride-Rite Air Helper Springs Installation - 2017 Ford F-250 Super Duty
- Video: Redline Trailer Suspension - Leaf Spring Suspension - APS1 Review
- Video: Firestone Ride-Rite Rear Air Helper Springs Review