Lift Kit Recommendations For A 2021 Forest River No Boundaries Single Axle Travel Trailer

Question

Question:

Hello I am looking for a lift kit for my2021 forest River no boundaries rv camper, single axle and looks like a dexter axle.

asked by: Carlos A

0

Expert Reply:

If you have a standard leaf spring axle and the leaf springs are mounted below the axle you could use the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 (for 2-3/8" diameter axles) or part # K71-385-00
(for 3" diameter axles). This would lift the trailer by the height of the leaf spring stack and diameter of the axle.

You could also use the Lippert Components Standard Axle Lift Kit # LC425750 to lift the trailer 1.88". Lippert also has the Correct Track Trailer Alignment and Lift Kit # LC87120, which can give you either a 1-1/4" or 2-1/4" height increase.

expert reply by: Kevin C

0

Answer 1

Appreciate that info, and we do have a lift kit designed specifically for Lippert torsion axles, and will give you 3-1/2 inches of lift, so long as it is a square torsion axle: - Square: Axle Riser Kit - Single Square Torsion Axle #LC382741

view full answer...

Answer 2

I sent your axle info to Dexter and they were able to determine that you have a set of 7k Dexter Torflex axles so the correct lift you need is the part #K71-725-02 which will give you a lift of 3-1/8 inches.

view full answer...

Answer 3

Yes, the Torflex Lift Kit #K71-725-02 is the correct one to use on your 5th wheel trailer with tandem #12 Dexter 7K Torflex axles. This kit will provide an additional 3-1/8 inches of rise and will help level out your trailer so it isn't nose…

view full answer...

Answer 4

Hey Robert, for a 5,200 lb Dexter Torflex axle like what you have we have the Dexter lift kit part #K71-724-02 which will give you a lift of 2-7/8 inches.

view full answer...

Answer 5

The Dexter Torflex Lift Kits like the Tandem Axle #K71-725-02 that you referenced are only confirmed to work with Dexter Torflex axles. It's possible that the spacers will fit with your AL-KO axles but this has not been tested. The spacers for…

view full answer...

Answer 6

Yes, we can ship the Space Dock 2" Receiver Adapter for Torklift Palomino Landing Pad Bumper part #TLA7900 to you in Canada! However, the quoted shipping costs does not include all brokerage fees and duties. Taxes are not included and all prices…

view full answer...

Answer 7

Sounds like you have torsion axles which is the other common trailer suspension setup aside from leaf springs. The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is…

view full answer...

Answer 8

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 9

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 10

The correct lift kit to use on your Forest River R-Pod Trailer will depend on the year. If you have a post 2014 then you will need to use the Axle Riser Kit part #LC382741 for square shaped axles or part #LC270682 for diamond shaped axles as Forest…

view full answer...