Lift Kit Options For A 2015 Winnebago Micro Minnie 1706FB
Question:
2015 Winnebago 1706FB lift kit. Do you have or can you recommend a source if you dont? BTW, unit has 13 wheels and tires which I will upgrade to 15 Falken Wildpeaks or equal. Many thanks, B2
asked by: Bruce A
Helpful Expert Reply:
Hi Bruce,
To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I can pick out the correct kit. If you have a leaf spring suspension then you'll just need to check if the leaf springs sit below the axle (underslung) and measure the diameter of the axle.
If they are underslung then you'll need the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 (2-3/8" diameter axles) or # K71-385-00 (3" diameter axles) for each axle. Based on the GVWR I can see for your trailer you most likely have a 2-3/8" diameter axle. I've attached a couple of videos below where I'll help walk you through the installation process.
When increasing the size of the tires you'll want to keep in mind that you'll want to have at least 4" of space between the front and rear tires and that increasing the size is going to place these closer together.
Bruce B.
3/22/2024
Thanks, Kevin. I'll get back to you next week after I do the research you recommend. Many thanks, B2
Products Referenced in This Question
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 3 Inch
- Dexter
more information >
Product Page this Question was Asked From
Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Torsion Axle
- Single Axle
- Lippert
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift
- Article: Trailer Tire Sizing
- Video: Review of Lippert Trailer Leaf Spring Suspension - Axle Risers Single Square Torsion Axle - LC382741
- Search Results: cipa towing mirrors
- Shop: Towing Mirrors
- Search Results: trailer towing mirrors
- Shop: Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Shop: Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
- Q&A: Lifting Horse Trailer Suspension on Lippert Axle
- Q&A: How to Determine if Lippert Axle Riser Kit Will Fit
- Q&A: Is Drilling or Cutting Needed to Install Axle Riser Kit LC270682
- Video: Trailer Brake Controller Installation - 2009 GMC Yukon
- Video: K-Source Snap and Zap Towing Mirrors Installation - 2017 Chevrolet Tahoe
- Article: Double-Eye Trailer Suspension System Review
- Shop: CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side
- Shop: K-Source Custom Extendable Towing Mirrors - Manual - Textured Black - Pair
- Shop: K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Brake Controller
- Shop: Spare Tire Cover
- Shop: Blind Spot Detection
- Shop: Exhaust
- Shop: RV Camera
- Search Results: rv locks
- Search Results: bbq
- Search Results: jack foot plate
- Search Results: tongue jack extension
- Search Results: axle riser kit
- Q&A: Where is Kenda Tire AM10208 Made
- Q&A: How To Lift a Forest River R-Pod Trailer
Bruce B.
3/27/2024
Kevin, looking at the printout of both axle tags, the #'s are the same. Relevant #'s are: Top #: V000206386 Bottom #: RPO-0450A57325 Mfg. date: 5-22-14 Thnx, B2