Replacement RV Sink Options For A 13-3/8" x 24-1/2" Cutout Hole

Question

Question:

I am looking for a replacement for my under mount kitchen sink that fell. I want a in double bowl sink. The opening measurements are 13 3/8 X 24 1/2 .

asked by: Sally J

0

Expert Reply:

The closest double bowl option that we currently offer is the Better Bath RV Kitchen Sink - White # LC29FR. This sink is a top-mount drop-in design and would require a cutout hole 23.94" W x 16.44" L so you'd have to trim the cutout hole larger in order for it to fit. It also comes in gray # LC808488 and parchment # LC85ZR.

We do offer a single bowl option, part # LC42UD, that's an undermount design and would have enough of a lip to mount in your 13-3/8" x 24-1/2" cutout hole.

expert reply by: Kevin C

0

Answer 1

If you're undermounting the Better Bath RV Kitchen Sink #LC421572 then you'll want to cutout hole to be between 12-7/8" and 14-1/2" deep and between 22-7/8" and 24-1/2" wide so that the lip can touch the countertop and be…

view full answer...

Answer 2

Yes, the Better Bath Single Bowl RV Kitchen Sink #LC421572 referenced in your question will fit into a 24 inch x 14 inch opening. Its dimensions excluding the outer flange are 22-7/8 inches long, 12-7/8 inches wide, and 6 inches deep. With the outer…

view full answer...

Answer 3

There is not a stainless steel sink protector that is made specifically for the Better Bath Single Bowl RV Kitchen Sink #LC421572. I'm sure there is one that will work but nothing that is offered here, you just need to find one that fits inside…

view full answer...

Answer 4

The overall dimensions of the Better Bath RV Kitchen Sink part #LC421572 including the lip are 25" long x 15" wide x 7" tall. The lip is 1" so if you wanted the bowl dimensions that would be 23" long x 13" wide x 7"…

view full answer...

Answer 5

The Better Bath Single Bowl RV Kitchen Sink part #LC421572 is designed to fit a rectangular opening of at least 13 1/8" by 23 1/8". If your opening matches this or is not more than 1 1/8" larger than that this would be a good fit. If…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

The closest modern tire size to a 7.00-15 tire is a 225-75-15 like the #AM10256 tire you mentioned. Typically, a 225/75-15 tire will measure about 8-3/4 to 9 inches wide by around 28-1/2 inches in diameter. We offer the same size in a Load Range E as…

view full answer...

Answer 8

The Titan Hitch Box Extension and Reducer for 2-1/2" Trailer Hitches, #RP45292, is a confirmed fit for your 2012 Chevrolet Silverado 2500 HD short bed with a Lance camper. This extension is specifically designed for your slide-in camper with the…

view full answer...

Answer 9

The Reese Titan Extension/Reducer you referenced, part #RP45292 would work great with the 2-1/2 inch Class V hitch on your Ram. As you mentioned, the extension has a 8K capacity when cut down to the 24 inch length, that will provide a 2 inch receiver…

view full answer...

Answer 10

According to my research, your 92865A-1 hub/drum has a 25580 inner and an 14125A outer bearing and a 8 on 6-1/2 inch lug pattern, as does the AxleTek #AKHD-865-7-2-K hub drum you referenced. The #AKHD-865-7-2-K would be an acceptable replacement for…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

The closest double bowl option that we currently offer is the Better Bath RV Kitchen Sink - White #LC29FR. This sink is a top-mount drop-in design and would require a cutout hole 23.94" W x 16.44" L so you'd have to trim the cutout hole…

view full answer...