Trailer Hitch that Fits 2023 Kia Niro EX HEV

Question

Question:

I have a 2023 Kia Niro ex HEV and need to get a hitch for it as soon as possible. I need to know if the #C77NR Curtis Hitch fits my vehicle. Thank you!

asked by: Mary

0

Expert Reply:

Yes, the Curt hitch part # C77NR that you referenced is a confirmed fit for your 2023 Kia Niro EX HEV. This would be just what you would need.

expert reply by: Jameson C

0

Answer 1

According to Curt, the time it would take an experienced mechanic to install the #C77NR is 25 minutes. It would take the average person about an hour. I have attached the installation instructions below for your reference.

view full answer...

Answer 2

Although both the Curt #C77NR and #C37BR both look to be identical there is a small difference in the #C77NR that allows it to be compatible with 2022 and 2023 Kia Niro models, whereas the #C37BR is only compatible with 2022 models.

view full answer...

Answer 3

The Curt Trailer Hitch item #C77NR weighs 30 lbs. This hitch is confirmed to fit the 2023 Kia Niro EV. If you are planning on towing you will also need a wiring harness item #119250KIT and a ball mount kit item #C45534.

view full answer...

Answer 4

I checked with our vendors and the correct hitch for your 2023 Kia Niro HEV is going to be the Curt Trailer Hitch item #C77NR. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. I…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver #C77NR will be the receiver which fits your 2023 Kia Niro hybrid. The Draw-Tite #DT79YR will not fit your Niro. The Curt Powered Tail Light Converter #C59236 will give you a 4-way flat connector. This is the common…

view full answer...

Answer 6

Only a small part of the underneath bumper panel on your 2024 Kia Niro is needed to install either the Curt hitch that fits, which is the following part number: - Curt Trailer Hitch Receiver #C77NR I added a portion of the instructions which shows…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...