How Much Trimming is Needed to Install Curt Trailer Hitch on 2024 Kia Niro

Question

Question:

On a 2024 Kia Niro i see some trimming is needed of the underbody panel. how much is required?

asked by: Dave M

0

Expert Reply:

Only a small part of the underneath bumper panel on your 2024 Kia Niro is needed to install either the Curt hitch that fits, which is the following part number:

- Curt Trailer Hitch Receiver # C77NR

I added a portion of the instructions which shows the amount, and as you can see it's just a 2" x 4" small section.

expert reply by: Kyle S

0

Trimming Needed to Install Curt Trailer Hitch on Kia Niro
(click to enlarge)

Answer 1

The Curt Trailer Hitch Receiver #C77NR will fit the 2023 and 2024 Kia Niro PHEV. Gas models require lowering the emissions canister so the hitch can fit. We have only had the one instance where someone felt the need to completely remove it, but…

view full answer...

Answer 2

In order to install the Curt #C77NR on your 2023 Kia Niro hybrid, you'll need to trim a small portion of the underbody panel, not the fascia. The trimmed portion won't be very visible from the rear, it'll be more so from…

view full answer...

Answer 3

I checked with each manufacturer and can verify there is a trailer hitch receiver that fits your 2022 Kia Niro EV, and it is a 2" hitch from Curt: - Curt Trailer Hitch Receiver #C77NR

view full answer...

Answer 4

According to Curt, the time it would take an experienced mechanic to install the #C77NR is 25 minutes. It would take the average person about an hour. I have attached the installation instructions below for your reference.

view full answer...

Answer 5

Yes, the Curt Trailer Hitch Receiver #C77NR is a confirmed fit for the 2024 Kia Niro.

view full answer...

Answer 6

For your 2023 Kia Niro LX Hybrid we offer the Curt Trailer Hitch Receiver #C77NR. This is a class III receiver with a 2" square opening for your ball mount or hitch mounted accessories. It is a custom fit unit so you will not have to drill…

view full answer...

Answer 7

I checked with our vendors and the correct hitch for your 2023 Kia Niro HEV is going to be the Curt Trailer Hitch item #C77NR. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2"…

view full answer...

Answer 8

Yes, the Curt hitch part #C77NR that you referenced is a confirmed fit for your 2023 Kia Niro EX HEV. This would be just what you would need.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

How Much Trimming is Needed to Install Curt Trailer Hitch on 2024 Kia Niro

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching