Trailer Hitch Installation - 2017 Toyota Tacoma - Curt Video

Since you do not have the factory tow package on your 2016 Toyota Tacoma, you will first need the 4-way which the #C56349 will give you. To adapt that 4-way into a 7-way you will be able to use the Hopkins #HM40975 and the #HM40985 you mentioned,…

Yes, we do have a hitch for your 2023 Toyota Tacoma. It is the Curt Trailer Hitch item #C13264. This hitch is custom fit and bolts to your Tacoma with included hardware. This is a class III hitch with a 2" receiver. It has a 7,000 lbs towing…

The main difference between the Curt #C13264 and the etrailer #e98905 hitch receivers lies in the superior matte black powder coat finish of the etrailer hitch versus the traditional glossy finish of the Curt hitch. I recommend #e98905 because the…

For your 2021 Toyota Tacoma Access Cab, I recommend going with the Curt Trailer Hitch Class III - 2" #C13264. This is the highest weight capacity hitch we offer with a max tongue weight of 900lbs and max towing capacity of 6,000lbs. This hitch…

Yes, I verified directly with the manufacturer that the Curt hitch does fit your 2023 Toyota Tacoma, with the correct part being the following: - Curt Trailer Hitch Receiver #C13264 If you'll be towing and also need a 4-way wiring harness the…

If you are just looking to tow a trailer with lights and without brakes, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C56349. This will give you a 4-Pole flat on the back of the Tacoma to tow a…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The 4-Way flat connector that I recommend for your 2020 Toyota Tacoma is the Curt T-Connector #C56349. Then, depending on what you have on your Tacoma you might also want to check out the Mounting Bracket #18144 as well as a no-drill bracket like…

We haven't had the chance to install Curt trailer hitch #C11433 on a 2017 Chevy Spark so there aren't pictures. But I have included a picture from the installation instructions linked here and on the product page for the hitch that shows the…

Yes, in order to install a trailer hitch on a 2020 Subaru Outback you will need to remove the rear bumper but this is what allows the trailer hitch to have a hidden design so that you don't see a bulky crossbar. That said, I know this may seem…

If you want a fully functioning 7-way on your 2019 Toyota Tacoma you can use part #22117. This includes everything you need including the wiring to install a brake controller which you don't need since your trailer doesn't have brakes. If you…

Yes we do carry replacement fishwire for the 1/2 inch bolts of the etrailer hitch part #e98905 with the part #80101-1 which is same size.