Trailer Wiring Harness Installation - 2015 Honda CR-V Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Your 2015 Honda CRV has a towing capacity of 1500 lbs max. The 2017 Aliner Scout has an unloaded weight of 1180 lbs with a max carrying capacity of 1320 lbs to give a gvwr of 2500 lbs. As long as you keep the towing weight under 1500 lbs when loaded,…

There are a couple of differences between the wiring harnesses for your 2016 Ram ProMaster. The biggest difference is the technology used. The Curt #C56270 uses what is called Surface-Mount Technology. Essentially what this does is almost eliminate…

There are two trailer wiring harnesses confirmed to fit your 2013 Honda CR-V. They are the Tekonsha #118561 and the Curt #C56158. The Tekonsha installs behind the tail lights and the Curt behind trim panels in the rear Cargo area. I have included…

The Draw-Tite trailer hitch receiver, part #75547, uses 4 hex bolts that are M10 X 1.25 X 30. However, you shouldn't tap the threads uness you absolutely have to as a last resort. I highly recommend cleaning them before tapping them. I've…

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

I did some checking and it looks like your 2016 Honda CR-V has a 1,500 lb towing capacity so as long as you stay under that trailer weight you'd be fine to install a hitch like the #75742 that you referenced. I attached an install video for this…

A 4-pole wiring harness like Curt #C56158 or Tekonsha #118561 can simply be pulled from the back of the vehicle when you need it for towing a trailer. The wiring will be safe with the hatch closed on it (as long as you avoid the latch mechanism)…

The Curt T-Connector Vehicle Wiring Harness part #C56158 does come with two fuses, one that gets installed inline with the harness that protects the converter and then one that gets installed in the interior fuse box that protects the vehicle's…

The procedure for installing the Draw-Tite Class III Receiver Hitch #75742 hasn't changed from the 2013 to the 2016 model. Each model year, Draw-Tite evaluates the hitch fits and will illustrate any changes in the instructions, which you can see…

When installing the Curt T-Connector #C56158 on your 2014 Honda CR-V you need to access the fuse panel under your dash and put the 10 amp fuse in position 10. I have attached a photo showing this as well as an installation video that you can check…

The drivers side bolts will not bolt through the appearance panel. There will be an 8-1/2 inch by 4-1/4 inch cutout in the appearance panel for the drivers side bolts. This cutout will give you enough room to bolt the hitch on and leave the…