Replacement 4-Leaf Slipper Spring Measuring 25" Long
Question:
I need a set of 25 inch x1 3/4 4 leaf slipper spring forms boat trailer an it has radius end will the flat work or it has to be radius.
asked by: Blaine
Expert Reply:
It can be a flat end as long as the flat part is long enough that it can reach past the wet bolt just fine.
For your application it looks like the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles # e69SR is the closest that we have as it's a 4-leaf slipper spring with a radius end rated for 2K trailer axles. The only catch is that it measures 24-5/8" from the center of the eye to the very end of the spring.
Since the length is only off by 3/8" though this might still be what you're looking for. If you're measuring your leaf spring while it's under a load then this will cause it to flatten out some which would account for the slightly longer length. I recommend jacking up one side of your trailer frame so the tire is off the ground and then try measuring the leaf spring when no weight is on it to see how that changes things.
Attached is a review video for you to check out.
Product Page this Question was Asked From
4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Radius End
- 2000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 24-5/8 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Search Results: leaf springs
- Search Results: spare tire carrier
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Timbren Suspension Enhancement Systems
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: Dexter 4-Leaf Slipper Spring w/ Hook End for 2,500 lb Trailer Axles - 26-3/4" Long
- Video: etrailer Radius End 4-Leaf Slipper Spring Installation
- Search Results: e69sr
- Article: Trailer Tire Sizing
- Video: Review of etrailer 4 Leaf Slipper Spring - e69SR
- Q&A: Dimensions of the Torklift Rubber Camper Bumpers # TLA7001
- Video: Universal Group 4-Leaf Slipper Spring Installation
- Q&A: Spring Compression for the etrailer 4-Leaf Slipper Spring While Under a 1,000 lb Load
- Video: Universal Group Trailer Suspension - Leaf Spring Suspension - SP-179275 Review
- Q&A: Determining Correct Replacement Slipper Spring For Dual Jet Ski Trailer
- Q&A: Replacement Slipper Springs for 1982 Cox Boat Trailer
- Search Results: slipper spring bracket
- Search Results: 4 leaf slipper spring
- Search Results: 166079
- Search Results: axle mounting kit
- Q&A: Is there a 12 Inch Trailer Tire that is Rated for 80 Miles Per Hour
- Q&A: Can Bigger Tires and Wheels be Used on a Aluminum Jet Ski Trailer with 145/12 Tires
- Q&A: Which Trailer Tire Size is best for a Jet Ski Trailer that has 4.80-12 Tires
- Video: Stallion Camper Jack - Stabilizer Jack - 288-01892-2 Review
- Video: Ultra-Fab Products Camper Jack - Stabilizer Jack - UF48-979003 Review