Timbren Suspension Enhancement Systems

Timbren Suspension Enhancement Systems (SES) are easy-install kits created to provide additional support for your vehicle's suspension. These kits are designed to enhance the suspension, handling and safety of your vehicle, and also to reduce sag from heavy loads by becoming stronger and more resistant as the weight of the load increases.

Benefits of Timbren Suspension Enhancement Systems

Levels vehicle
Increases stability and handling, especially when you are hauling heavy loads
Decreases vehicle sag, thereby increasing wheel traction
Each spring works independently of other springs installed on the vehicle
Helps to handle off-center loads in vehicle
Reduces vehicle roll
Prevents bottoming out
Dramatically increases your vehicle suspension's lifetime
Rubber springs absorb substantial amount of shock from the road
Does not affect unloaded ride of vehicle
Allows vehicle to use its own suspension when unloaded

Application

Use Rear Application Kits for:

Towing. SES kits enhance vehicle ride by providing weight distribution and sway control. Recommended if you're towing a trailer similar to the weight of your vehicle.
Salting trucks
Vehicles with unusual loads. This includes aerial trucks, work vans with internal shelves, and pickup trucks hauling loads that shift.

Use Front Application Kits for:

Snow removal vehicles
Vehicles with heavy front-mount accessories (ex: plows, grille/brush guards, winches)

NOTE: SES kits assist and enhance suspension in good working condition. They are NOT designed to decrease sag on an already poor suspension or to increase the weight-carrying capacity of a vehicle.

How Do Timbren Suspension Enhancement Systems Work?

The smoothness of the ride results from the rubber construction of the springs. When re-expanding, rubber absorbs the shock from the road, providing a cushioned ride for your vehicle. Rubber, unlike other materials, will always bounce back to full height, so your ride quality will not deteriorate over time.

Progressive support comes from the convoluted springs. Kits come with single, double, or triple-convoluted springs. These springs quickly collapse along the fold, so the remaining "barrels" become increasingly difficult to compress. This adds strength to the vehicle's suspension. Springs effectively get stronger with added weight!

Diagram of a Loaded and Unloaded Convoluted Spring

Installing Timbren Suspension Enhancement

Timbren SES kits can be installed in only a few simple steps. For light-duty kits, installation is usually about 20-60 minutes per axle. For heavy-duty kits, install time is about 60-120 minutes per axle.

Tools Required

Jack/jack stands
Basic tool kit (Some kits may require additional tools, which can be found at most hardware or auto supply stores)

Timbren SES Kit Parts

Kits come with the parts needed for installation on one axle.

2 Aeon rubber springs (replace OEM bump stops)
Vehicle-specific brackets (upper and lower, if necessary)
All hardware

Installation Steps

Step 1: Raise the vehicle and remove the tire and wheel (optional) so that the vehicle's suspension hangs freely

Step 2: Remove factory bump stop

Step 3: Assemble Timbren spring and bracket as shown in instructions

Step 4: Mount spring and bracket into existing bump stop holes

Step 5: Reinstall tire and wheel (if removed)

Step 6: Lower vehicle and check clearance (Clearance is the distance between the rubber spring and axle)

Pictured: Timbren SES Kit Components

Recommended clearance for rear applications:

1/2-Ton and 3/4-ton trucks: 1" clearance
1-Ton trucks: 1/2" clearance
Heavy-duty applications: No clearance

Recommended clearance for front applications:

0" - 1" Clearance

Pictured: Example of typical clearance in standard applications

Typical Clearance in a Heavy-Duty Application

Pictured: Example of clearance in heavy-duty applications

Additional Notes on Clearance:

If your spring does not have the recommended clearance, yet the ride of your vehicle is satisfactory, then ensuring the recommended clearance is not necessary. If the spring is touching at all times, it will not damage the vehicle. The rubber spring was designed for contact.

If you do not have the recommended amount of clearance or your ride is not satisfactory, you can take a few steps to resolve the problem. First, install or remove any supplied spacers to increase or decrease space between the rubber spring and axle. If this doesn't resolve the problem, call etrailer.com's Customer Service department with the following information handy:

Your vehicle's year/make/model
Whether it is 2WD or 4WD
The measurement from the axle to vehicle frame (where bump stop is located)

Timbren has a satisfaction guarantee that ensures you will be provided with the correct parts for your vehicle. etrailer.com's Customer Service department can help you get the replacement parts you need to get a satisfactory ride.

Timbren Warranty

Timbren SES kits have a limited lifetime warranty. The warranty is for the lifetime of the vehicle on which the kit was originally installed. The warranty is strictly related to parts (does not include shipping or labor).

Severe-use vehicles (tow trucks, dump trucks, aerial lift vehicles, snowplow trucks, pickups with slide-in campers) have 5-year or 250,000-mile warranty.

Thomas C.

8/20/2022

Is there any rear weight carrying enhancement for a 2016 Toyota Highlander all wheel drive vehicle? I tow a small enclosed trailer with a tongue weight about 350 lbs.

David B.

8/25/2022

There may be an option for you. I need you to measure the gap between your coil springs(both sides) while the vehicle is sitting on a flat surface. No need to raise it or anything. Let me know the gap I can find out if there is anything made for your Highlander.

Thomas C.

8/25/2022

Thanks for reply David. Not sure exactly what gap you are referring to. Would that be the distance vertically from top of coil to bottom?

David B.

8/25/2022

Sorry about that, seems kinda vague now that I look at it lol. If you have a spring sitting up and down just pick the middle most part of the spring and measure the small gap between the coils. I'll use this # CSS-1145R as an example, see how it will fit between the coils in the product image with the yellow colored spring. That gap the black arrow is pointing to is the measurement I need.

See All (5) Replies to Thomas C. ∨

Justin

7/23/2022

Nice item! But want to know is it safe in winter? Will it crack because of cold weather such as frozen ? Will warranty cover if damage due to cold weather that froze it and crack it? I’m interesting in it for my truck but want to know about winter and will this item crack if it’s froze?

David B.

7/25/2022

The timbrens won't give you any problems in the severe cold. They do have a limited lifetime warranty.

Helpful Links

question-207356.html

question-534590.html

Tim

5/21/2022

Please send me some information on the rectangle air bags . Dimensions/ collapsed height/extended height

David B.

5/21/2022

Are you talking about the air helper springs that you can put in your vehicles springs? Or just the normal air bags for suspension enhancement? Either way I will need to know your vehicles year, make and model to get you the correct information. The article you are linked to is about timbrem suspension enhancement bumpers, they have no air bags and are more of a jounce style bumper, not an air bag.

Helpful Links

s.aspx?qry=spring+air+bags&furl=-pg-vehicle_suspension-pt-air_springs

Mark M.

3/19/2022

Are these easy to put on? Also will this affect my overload shocks?

Les D.

3/21/2022

You can install these as they are physically not touching, however it seems redundant as they both do the same thing. Is it possible that you want the Timbren springs because the overload springs are not installed correctly in order to share the rear axle load?

David C.

2/17/2022

Do you have a set for a 2020 Ford F350 26' RV?

Les D.

2/17/2022

@DavidC if you have an F-350 (not E-350) RV on a Ford Cab & Chassis, then you will want the SumoSprings, 4X2 Front: SSF-111-54 4X2 Rear: TFR350CC 4X4 Front: SSF-111-54 4X4 Rear: TFR350CC

Tom L.

2/10/2022

Do you have a dealer program? I would like to try your product And possibly sell the product at my location. Please price a HD set for 2021 Chevy 3500 long bed dually

Les D.

2/10/2022

@TomL for your 2021 Silverado 3500 Dually (2WD or 4WD) The correct Timbren SES is: # TGMFK25D Front # GMRTT35D Rear Standard # TGMRTT35D Rear Heavy Duty The Heavy Duty rear end would be for salt spreaders, slide-in campers, or other heavy loads that are taller than the side rails. Retail pricing for these items are found on their respective product pages. I have placed links here for you. To inquire about becoming an etrailer dealer use the "Create Dealer Account" link below.

Helpful Links

accounts/dealerinquire.aspx

Show All (6) Replies

Hide Replies

Explore Expert Info

on Vehicle Suspension

Videos

for Vehicle Suspension

Help Articles

for Vehicle Suspension

Expert Answers

for Vehicle Suspension

Timbren Vehicle Suspension - Rear Axle Suspension Enhancement - TGMRC25HD Review

Timbren Front Suspension Enhancement System Review

Timbren Rear Suspension Enhancement System Review

Air Lift LoadLifter 5000 Ultimate Rear Air Helper Springs with Internal Jounce Bumpers Review

Timbren Front and Rear Suspension Enhancement Systems Installation - 2021 Ford F-53

Firestone Ride-Rite Air Helper Springs Installation - 1994 Chevrolet C/K Series Pickup

Review of SuperSprings Vehicle Suspension - Rear Axle Suspension Enhancement - SSR-109-40

B and W Companion OEM 5th Wheel Hitch with Slider Installation - 2022 GMC Sierra 2500

Timbren Vehicle Suspension - Rear Axle Suspension Enhancement - TFRF53A Review

Coil SumoSprings Rear Axle Helper Springs Review

Timbren Vehicle Suspension - Rear Axle Suspension Enhancement - TFR350SDJ Review

Firestone Ride-Rite Red Label Air Helper Springs Installation - 2022 GMC Sierra 2500

Choosing the Right Suspension Kit for Your Truck and Trailer

Best Air Bag Suspension (2023)

Embrace Winter Wanderlust: Celebrate Holidays with Harvest Hosts

RV Sway Control, Stabilization, and Suspension Enhancement

The Basics: Firestone Air-Spring Kits

Stability Control for Heavy Duty Vehicles

Trailer Maintenance Schedule

Determining Trailer Tongue Weight

Brake Controller 7- and 4-Way Installation Kit (ETBC7)

Anti-Rattle Devices

Trailer Hitch Receiver Sizes

Must-Have Flat Towing Components

Which SumoSpring Helper Springs Fit a 2023 Coachmen Pursuit 31BH on Ford F-53 V8 18K Chassis?

For your 2023 Coachmen Pursuit 31BH you will need the Front SumoSprings Rebel Custom Helper Springs #SSF-170-40-2 and Rear SumoSprings Maxim Custom Helper Springs #SSR-184-40-1. If you were to select only one to install first I recommend the rear…

view full answer...

Does Timbren Suspension Enhancement Fit 2022 Ford F-350 Tremor

Yep, it sure does; the Timbren suspension enhancement you asked about is a fit for your 2022 Ford F-350 Tremor. The correct part number is the following: - Timbren Suspension Enhancement System #TFR350SDJ The Timbren #TFR350SDJ are a really smart…

view full answer...

Correct Air Bags for a 1994 Chevrolet C/K Series 1500

Yes, I checked with Air Lift and the Air Lift LoadLifter 5000 Air Helper Springs part #AL57216 are listed as a fit for a 1994 Chevrolet C/K Series 1500 (All Cab/Bed Types).

view full answer...

Best Way to Prevent Sagging Suspension When Towing a Trailer

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

view full answer...

Why Would Timbren On One Side of Truck be Compressed and Other Not at All

The unloaded picture of your Timbren setup installed on your truck is concerning. Does the truck seem to sit level from left to right? Was it ever in an accident by chance? Are any of the suspension components worn out? You really shouldn't…

view full answer...

Are SuperSprings SuperSway or Timbren Springs a Better Option 2023 Ford F-350 Dually Reduce Sag?

The SuperSprings SuperSway Stops #SS65GR are going to be the better option versus the Timbren #TFR350SDJ on your 2023 Ford F-350 Dually with upper overload springs. The Timbren's are designed to leave a 1" gap between the jounce…

view full answer...

5,000 lb. or 7,500 lb. Firestone Air Bags for a 2022 Ford F-250 Super Duty w/ 4 Wheel Drive

Since you are pulling a trailer that weighs around 8,500 lbs. you would just want to stick with the Firestone Ride-Rite Air Helper Springs #F35FV (5,000 lb.). You really only need to spend more for the Firestone Ride-Rite Red Label Extreme Duty Air…

view full answer...

Will Timbren Springs Keep Leaf Springs from Flattening Out on 2007 Chevy Silverado Classic 3/4 Ton

The leaf spring stack on the 2007 Chevy Silverado Classic 2500HD does not seem to bow very much as it is but with the Timbren springs installed, #TGMRCK25S, it would keep them from flattening out as much as they do now on your truck. The Timbren…

view full answer...

How Many MORryde X Factor Crossmembers Does Triple Axle Trailer Need

For a triple axle trailer you would need four of the MORryde X-Factor Crossmembers #MR33WR. These are compatible with the CRE30000 equalizers you have as well.

view full answer...

Will Timbren Rear Helper Springs Fit a 2014 Nissan Armada SL 2-Wheel Drive

The picture you have provided looks like the 2014 Nissan Armada 2-wheel drive model that you have does have a bump stop and Timbren does not exclude 2-wheel drive models so you will be able to use Timbren springs #TNRARM. I have linked a help article…

view full answer...

Do You Recommend Timbrens or SumoSprings to Eliminate Sag on My 2022 Ram 1500?

When considering whether to get Timbrens like #TDR1500DS or the SumoSprings like the #SSR-307-47 on your 2022 Ram 1500, I recommend the SumoSprings to deal with your rear sag. The SumoSprings will help restore the sagging as well as give you a…

view full answer...

What are the Dimensions of the Timbren Spring #TGMRYS4

I spoke with my contact over at Timbren about helper springs #TGMRYS4. The overall height of the whole assembly is 4-3/4 inches. The spring by itself is 3-3/4 inches. You'll want an inch to an inch and a half of space between the frame/axle and…

view full answer...