Brophy U-Bolt Stabilizer Clamp Review Video

The Timbren Trailer Suspension Enhancement System #TTRA1702 is 2-3/4" tall with no load on the spring. This particular system is designed to mount to the frame with the included bracket(see image) and when the suspension compresses the axle will…

While we do have some great U.S.A.-made boat trailer jacks, the etrailer Round Swivel Marine Jack #MJ-1500B-DWL is manufactured in China. However, for a super close U.S.A.-made model, I recommend the Dutton-Lainson Swivel Marine Jack #DL67MR. This…

The Valterra Folding Manual Stabilizer for Trailers and RVs #020106 does not have a specific weight capacity since it does not actually lift. Jacks and landing gear do have capacity ratings because they lift some trailer weight but the Valterra…

Yes, there is one stabilizer from Valterra for RVs, the aptly named Valterra Folding Manual Stabilizer for Trailers and RVs #020106. This is a simple-to-use stabilizer that will work so long as your trailer or RV has between 14" and 28" of…

The two parts you mentioned would be all you'd need, part numbers #753-3579 and #753-3583 as they appear to be the only parts that are damaged and the rest could be swapped over as needed.

The Replacement Locking Ratchet Arm Assembly for T2 Bike Carriers #752-1272-001 is about 1-1/2 inches longer than the original T2. This helps especially with Fat Bike Tires. I can only assume that it will eliminate your fork contact issue without…

You have 2 choices at this point. For the first option, you could use an extender like #HES6 which would provide an additional 5-3/4 inches of clearance for your Thule T2 Pro XTR, part #TH69TX which would allow it to fold but using an extender would…

The Roadmaster Quiet Hitch #RM-061 is one of our more popular anti-rattle devices. It has a very simple design while being very effective. The most important thing with this anti-rattle device is to make sure it's installed so that it is pulling…

The RockyMounts HighNoon FC Solo 1-bike rack #RKY87RR that you referenced has a capacity of 60 lbs, which is definitely enough to carry most electric bikes.

You could pretty easily attach your license plate to the mesh flooring of the Curt Cargo Carrier part #C18151 by using zip ties so that it would be visible when folded up. In the folded up position the taillights should still be visible if they were…

We do have an inexpensive folding cargo carrier that would work perfectly for you, the #C18151 from Curt. This carrier, at 20x59 is actually a bit larger than the Rola carrier you mentioned, and it's considerably less expensive. You will need to…

I can get you setup with a 7-way connector so you can use a Saris Door County Bike Rack for 2 Electric Bikes - Electric Lift - 2" Hitches - Frame Mount, part #SAR42RR. The nice thing about this setup is you will be ready to tow some trailers…