Will Timbren Trailer Suspension Enhancement System Work With Concession Trailer
Question:
Hey there Experts, I am in the process of building a concession trailer and wanted to add some support to my trailer and some more absorbing power for the road. I see that the unit with No load is 2-3/4inch tall here is the issue my clearance from the axle to the frame is currently 2-1/2inch with about 85 of our load still within the trailers limit meaning that I would place this and it would always have weight on it. Is this Bad? in the picture it shows a gap on the unit when its unloaded and contact when loaded technically with all our equipment in the trailer it will always be loaded at the same weight with the exception of a few things. Also since it is a lower clearance at the moment would this increase my ride height significantly? If it increases too much our serving window might be too high. Thanks for your time!
asked by: Agustin N
Expert Reply:
The Timbren Trailer Suspension Enhancement System, part # TTRA1702 is designed to be installed directly on the trailer frame. It has a weight capacity of 1,000-lbs.
As the instructions state, on trailers the springs will be in constant contact with the trailer frame so that is expected and the springs will work well for you. When under a load the springs will compress to a height of 1-1/8 inches so you will need a little more than that when no load is on the springs.
Product Page this Question was Asked From
Timbren Trailer Suspension Enhancement System Light-Duty Trailers 1,000 lbs
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Rubber Springs
- 1000 lbs
- Single Axle
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Timbren Trailer Suspension Enhancement System Light-Duty Trailers 1,000 lbs
- Video: Timbren Trailer Suspension - Leaf Spring Suspension - TTRA1702 Review
- Q&A: Will Timbren Trailer Suspension Enhancement System TTRA1702 Work On Utility Trailer With 2000lb Axle
- Q&A: How To Determine If Timbren Trailer Suspension Enhancement # TTRA1702 Will Fit Single Axle Trailer
- Q&A: What Trailer Suspension Enhancement is Best for Preventing Axle From Contacting Trailer Frame
- Q&A: How to Improve a Rough and Bumpy Ride on a 2,000 Pound Fruefoff Trailer
- Search Results: timbren axle~less suspension
- Q&A: Suspension Enhancement Kit for Lighter Duty Trailer
- Q&A: Recommended Rubber Springs for Suspension Enhancement on a Trailer With 800 lbs Max Load
- Q&A: Should Bump Stops be Added to a Trailer when Using and Over/Under Conversion Kit
- Shop: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Shop: SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Overslung
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Shop: Dexter Double Eye Leaf Spring for 2,000-lb Trailer Axles - 20-1/4" Long
- Article: How to Raise Your Travel Trailer Height
- Article: Slipper Spring Trailer Suspension System Review
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Search Results: axle flip kit
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Video: etrailer Trailer Axle 4-Leaf Double-Eye Spring Installation
- Search Results: equalizer
- Video: Timbren Axle-Less Trailer Suspension System Installation