Explaining 14K Weight Capacity of Timbren Silent Ride Suspension for Tandem Axle Trailers

Question

Question:

need info on timbren silent ride suspension 14000 bl is the capacity for the 2 excels or each one I want to install it on a 25000 gvwr trailer

asked by: Josue F

0

Expert Reply:

The Timbren Silent Ride Suspension for Tandem Axle Trailers - 3" Round Axles - 35" - 14K part # TSR14K35T01 has a total weight capacity of 14,000 lbs or 7,000 lbs per axle. The max per axle capacity of the Timbren Silent Ride Suspension is 7,000 lbs.

expert reply by: Conner L

0

Answer 1

Correct, the Timbren Silent Ride Suspension for Tandem Axle Trailers part #TSR14KT01 is designed for 7,000 lb axles as the total capacity is 14,000 lbs. It is also designed for a 33" axle spread. If you have a 35" axle spread you'll…

view full answer...

Answer 2

The Timbren Silent Ride systems like the part #TSR14K35T01 that you referenced weren't tested for the exact situation you mentioned so it's hard to say exactly what would happen. Timbren intended this setup for on-road applications but if you…

view full answer...

Answer 3

The maximum deflection or compression/movement of the Timbren Silent Ride Suspension for Tandem Axle Trailers #TSR14K35T01 is 1-5/8 to 1-7/8 inches. That's the amount it will move from zero load to full compression.

view full answer...

Answer 4

The Timbren Silent Ride Suspension for Tandem Axle Trailers - 3" Round Axles - 35" - 14K #TSR14K35T01 will work just fine with 4 inch drop axles. The mounting cradles and u-bolts will secure your axles as long as they are 3 inch round…

view full answer...

Answer 5

We have the Timbren Silent Ride Suspension for Tandem Axle Trailers #TSR14K35T01 that has a 14k capacity just like what you have that would be a great and easy solution for everything. This will be much smoother, quieter, and feel more controlled…

view full answer...

Answer 6

The simple answer to your question is yes, you can replace your standard 7,000 lb axles on both your 5th wheel and gooseneck toy hauler with the 14,000 lb Silent Ride: - Timbren Silent Ride Suspension for Tandem Axle Trailers - 3" Round Axles -…

view full answer...

Answer 7

The review you mentioned does have a customer of our having to install a 4 inch sub frame spacer to install the Timbren #TSR14K35T01 like you mentioned to accomplish the same ride height as their previous straight axle setup. But worth nothing is…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...