Trailer Hitch Installation - 1998 C/K Series Pickup - Curt Video

We carry numerous transmission coolers that are recommended for your 1994 Chevy C/K 1500. The determining factor on which is the best for your particular truck is the size engine it has and how much space there is to mount it in the location you…

The socket needed for the Fastway e2 is the 1-7/8" 12pt Thin Walled Socket #ALL643216.

The P3 brake controller, #90195, will go into a sort of sleep mode after it detects no movement for 15 minutes. While it is on it does not draw very much power. What you can do to make sure it goes to sleep is exit the truck after turning it off,…

Yep! The 1-7/8" 12pt Thin Walled Socket #ALL643216 does work with the e2 Fastway round bar weight distribution systems. This socket costs considerably less than the Equal-i-zer socket and works just as well so it's what we normally…

The Replacement Head for Fastway e2 Weight Distribution System #FA94-02-1055 uses a hitch ball with a 1-1/4" shank and the nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. If you don't have a 1-7/8"…

Correct, the Timbren Silent Ride Suspension for Tandem Axle Trailers part #TSR14KT01 is designed for 7,000 lb axles as the total capacity is 14,000 lbs. It is also designed for a 33" axle spread. If you have a 35" axle spread you'll…

The Curt Class IV, part #C14081 would work great for you. According to Curt, the spare will need to be dropped temporarily in order to facilitate the installation, but once the hitch is in place, the spare will fit back in its original location. This…

The Curt Slim Adjustable 2-Ball Channel Mount #C46KR that you referenced has two hitch pin holes that are one inch apart so the first pin hole has a distance of 10 inches from the ball center to the hitch pin and the other is 11 inches.

Towing capacity for your 1994 Chevrolet 3500 pickup will depend on several factors, including engine displacement, transmission (2x4 or 4x4), cab style and bed length. If you have the owner's manual for the truck that is the best place to check…

Yes, the Curt trailer hitch part #C14081 that you referenced does fit a 1999 Chevy C3500 dually crew cab. The picture I attached shows a review where someone has installed the hitch on a similar 1999 Chevy C Series.

According to my contacts at Curt Manufacturing, if the spare tire on your 1991 GMC pickup is the stock size, the spare tire might need to be slightly repositioned toward the front of the truck. This is a simple process. Remove spare, and install…

The Timbren Silent Ride systems like the part #TSR14K35T01 that you referenced weren't tested for the exact situation you mentioned so it's hard to say exactly what would happen. Timbren intended this setup for on-road applications but if you…