Recommended Trailer Hitch for a 2016 Ford C-Max

Question

Question:

Hi I need a 2 hitch for my 2016 Ford Cmax energi. Please let me know what could work. Thanks!

asked by: Jeff T

0

Expert Reply:

The best hitch for your 2016 Ford C-Max is the EcoHitch Hidden Trailer Hitch Receiver item # 306-X7200. This hitch has a 2" receiver which will give you the most options for accessories and the highest capacity available for your Ford.

In order to tow with this hitch you will also need a wiring harness item # C59496 and a ball mount kit item # C45534.

expert reply by: Jerred H

0

Answer 1

We have a hitch with a 2 inch opening like a Class III hitch that fits your 2015 Ford C-Max like the EcoHitch part #306-X7200 but this is technically a Class I hitch since the towing capacity is lower.

view full answer...

Answer 2

I reached out to Roadmaster, who told me the height from the center of the hitch to the top of the tire mount of the Roadmaster Spare Tire Carrier #RM-195125 is approximately 28-3/4" from the center of the hitch to the top of the tire…

view full answer...

Answer 3

We do indeed offer a 2 inch receiver hitch for your 2017 Ford C-Max. You'll want to use the #306-X7200 from EcoHitch.

view full answer...

Answer 4

The EcoHitch #306-X7200 fits your 2016 Ford C-Max and will work with the Thule EasyFold XT #TH903202. I personally verified the measurement and it was well over 2". From my research your bike is approximately 48 pounds, and the EasyFold XT…

view full answer...

Answer 5

I don't have vehicle specific information that would allow me to definitively say that the carrier would allow the rear hatch to open fully, but I can certainly help you figure it out. To determine if you'll have clearance,…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...