Is the Stinger Load Assist Compatible with the Malone SeaWing Kayak Carrier

Question

Question:

If I already have the malone seawing kayak carrier, can I buy these and they will fit/work with them??

asked by: Jody

0

Expert Reply:

Yes, if you already have the Malone SeaWing Kayak Carrier # MPG107MD, then you can get the Stinger Load Assist for Malone SeaWing Kayak Carrier # MPG350 and they will work together.

expert reply by: Scott S

0

Answer 1

Installing the factory roof rails that run front to back for a 2013 Ford Edge that currently has a naked roof will require drilling. Since it's a factory rack I can't really say how labor intensive the install is. I would check with a Ford…

view full answer...

Answer 2

Correct, the Malone AirFlow2 Roof Rack part #MPG216 will fit both your 2015 Ford Explorer XLT and your 2014 Ford Escape. The mounting feet can be slid back and forth along the crossbar to accept different roof widths. If you have a true moonroof that…

view full answer...

Answer 3

There are roof racks that will fit your 2007 Ford Edge with the Vista panoramic roof. For a quiet roof rack I recommend the Thule WingBar system using bars #TH711400 or #TH711420, foot pack #TH480R, and fit kit #THKIT1530. Then you can use the Malone…

view full answer...

Answer 4

You won't have an issue installing two of the Malone SeaWing Kayak Carriers #MPG107MD onto your 53" crossbars. This carrier can be clamped down on the crossbars right next to the mounting towers/legs, so you will have enough room for two of…

view full answer...

Answer 5

The longest crossbars any of our manufacturers recommend with your vehicle are 53 inches long. It's the Thule WingBar Evo system with the bars, #TH711400 for silver or #TH711420 for black, the foot pack #TH460R, and fit kit, #THKIT3118. If you…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 12

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...