Parts Needed To Convert EZ-Loader Trailer with 3,500 Lb Axle From Hydro Drum to Hydro Disc

Question

Question:

Im replacing drum brakes with disc brakes on a 22 foot EZLoader trailer with 3500 lb axle . Wheels 14 5 lug with bearing size L44649 and L68149. Im looking to buy the following: Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 10 DW05744-10 14.13 Hopkins Endurance 5-Way Flat Trailer Connector - Trailer End - Ergonomic Design HM47910 12.36 7-Way to 4-Way/5-Way Trailer Adapter for Vehicles with Lamp-Out Sensors Towing Trailers with LEDs C35FR 18.56 Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel KH84545S 159.43 qty 2 Kodiak Disc Brake Kit - 10 Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs K2R35S 912.23 Dexter DX7.5 -N-Go Brake Actuator - Disc Brakes - 2 Ball - Zinc Plated - 7,500 lbs 099-175-20 325.02 Kodiak Hydraulic Brake Line Kit - Tandem Axle - 24 24TA-BLKIT 150.35 Did I miss anything? Thanks

asked by: Kevin M

0

Expert Reply:

It seems like you have done your research as you do indeed have a complete list of parts to convert from hydraulic drum to hydraulic disc brakes on an EZ-Loader Trailer with 3,500 Lb Axle. I did add one thing you were missing though.

Dexter DX7.5 Drop-N-Go Brake Actuator part # 099-175-20
Kodiak Disc Brake Kit part # K2R35S
Kodiak Trailer Hub part # KH84545S *Bearing Kit part # DBRKHW35EZ
Kodiak Hydraulic Brake Line Kit part # 20TA-BLKIT
Hopkins Endurance 5-Way Flat Trailer Connector part # HM47910

I doubled checked everything over for you again and it looks like there will be no compatibility issues, just pick up some new brake fluid at an auto parts store and you'll have everything.

expert reply by: Conner L

0

Answer 1

The item you selected, Titan Disc Brake Kit and Leverlock Actuator w/ Electric Lockout, part #T4747200, is zinc coated to prevent corrosion. To prevent warping, I would recommend allowing the brakes to cool after driving a long distance before…

view full answer...

Answer 2

Since there isn't a way to convert your adjustable ball style of Titan Model 60 actuator to a leverlock style you'll need to remove the entire coupler and install the Dexter Drop-N-Go part #099-175-20 if you have disc brakes or part…

view full answer...

Answer 3

We do have some parts for the Dico Aero 6000 actuator on your Four Winns boat trailer: Replacement Master Cylinder - #T4395100 (you have to remove the check valve) Replacement Damper - #T4502000 Replacement Lock Spring - #T4501400 Replacement Bolt -…

view full answer...

Answer 4

The brake assembly part #40715 does not come with lock nuts and washers. For that we have the part #6-17 for the nut and part #5-8 for the lock washer.

view full answer...

Answer 5

It looks like you have 2,200 lb axles on your EZ Loader trailer. Since that is not a common axle rating you are going to have to remove the hubs of your trailer to get the bearing numbers so that we can pick out the correct system to fit your…

view full answer...

Answer 6

The Kodiak Dacromet Disc Brake Conversion Kit, item #K2HR35D, would be a good choice for conversion to disc brakes on your boat trailer. We have not had the opportunity to do a video installation for the disc brake conversion yet, but I will go…

view full answer...

Answer 7

I can let you know how to determine what disc brakes you need although we do not have any type of database with parts based on year, make and model of trailer and I was unable to find any reference to a model TRSX240. To get the right replacement…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 12

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...