Recommended Trailer Hitch For A 2022 Toyota Prius Prime

Question

Question:

Has item 306-X7369 been confirmed fitment for 2022 prius prime?

asked by: Joseph G

0

Expert Reply:

The EcoHitch # 306-X7369 is a confirmed fit for the Toyota Prius Prime for the 2017 to 2021 models years currently. This will likely change when EcoHitch has the chance to test it on a 2022, but I cannot 100% confirm the fitment until that point.

However, we do have the Curt # C11473 that is confirmed to fit your 2022 Prius Prime and is also an American made hitch. This will have a 2,000 pound towing capacity and a 200 pound tongue weight capacity, but you will need to check your owners manual to see what your vehicle is rated to. The only downside of going with this option is that it has a 1-1/4" hitch instead of the 2" the EcoHitch has. If you need a hitch urgently, this will be the best option.

expert reply by: Lazer S

0

Answer 1

We had a customer submit a photo of their EcoHitch part #306-X7369 installed on their 2018 Toyota Prius Prime which I attached to this page and in it you can see that the hitch opening is basically flush with the rear of the vehicle.

view full answer...

Answer 2

Both the part #C56371 is fit for your 2017 Toyota Prius Prime. The Curt kit uses it's converter box to interpret the other taillight functions to know when the brakes are being applied. Basically it's two different ways to accomplish the same…

view full answer...

Answer 3

Not all vehicles can handle the additional amperage draw of the trailer taillights on the vehicle taillight circuits. Those vehicles need setup that draws power from the battery. Some vehicles have higher rated circuits that can handle this, and…

view full answer...

Answer 4

There is a trailer wiring kit confirmed to work with your 2020 Toyota Prius Prime. I am also attaching a link to a hitch receiver for your vehicle if you do not already have one #C11473. The Curt #C56371 is the wiring kit you want for your vehicle.…

view full answer...

Answer 5

Wiring harnesses that connect to the vehicle battery for power, like the Curt T-Connector #C56371 for your 2020 Toyota Prius Prime, are designed to protect your OEM vehicle wiring so they are built around using the battery to power the lights. On a…

view full answer...

Answer 6

While the EcoHitch part #306-X7369 is a 2 inch hitch, it does have lower weight capacities more associated with 1-1/4 inch hitches of 2,000 lbs trailer and 300 lbs tongue weight, since this hitch is designed to fit a lower capacity tow vehicle, the…

view full answer...

Answer 7

Yes, the Curt Trailer Hitch Receiver part #C11473 is a confirmed fit for a 2020 Toyota Prius (All Models). The Curt Trailer Hitch Receiver is listed as a fit for a Prius and Prius Prime models from 2016-2020.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...