Trailer Hitch for a 2020 Toyota Prius

Question

Question:

I’m looking for a hitch for a 2020 Prius, which I understand is the same as the 2019. However the search function on the website doesn’t turn up a hitch. Can you confirm if the hitches that fit the 2019 will fit the 2020? Thanks.

asked by: David

1

Helpful Expert Reply:

Yes, the Curt Trailer Hitch Receiver part # C11473 is a confirmed fit for a 2020 Toyota Prius (All Models). The Curt Trailer Hitch Receiver is listed as a fit for a Prius and Prius Prime models from 2016-2020.

expert reply by: Conner L

1

Answer 1

The EcoHitch #306-X7369 is a confirmed fit for the Toyota Prius Prime for the 2017 to 2021 models years currently. This will likely change when EcoHitch has the chance to test it on a 2022, but I cannot 100% confirm the fitment until that point.…

view full answer...

Answer 2

We had a customer submit a photo of their EcoHitch part #306-X7369 installed on their 2018 Toyota Prius Prime which I attached to this page and in it you can see that the hitch opening is basically flush with the rear of the vehicle.

view full answer...

Answer 3

Not all vehicles can handle the additional amperage draw of the trailer taillights on the vehicle taillight circuits. Those vehicles need setup that draws power from the battery. Some vehicles have higher rated circuits that can handle this, and…

view full answer...

Answer 4

Wiring harnesses that connect to the vehicle battery for power, like the Curt T-Connector #C56371 for your 2020 Toyota Prius Prime, are designed to protect your OEM vehicle wiring so they are built around using the battery to power the lights. On a…

view full answer...

Answer 5

There is a trailer wiring kit confirmed to work with your 2020 Toyota Prius Prime. I am also attaching a link to a hitch receiver for your vehicle if you do not already have one #C11473. The Curt #C56371 is the wiring kit you want for your vehicle.…

view full answer...

Answer 6

Both the part #C56371 is fit for your 2017 Toyota Prius Prime. The Curt kit uses it's converter box to interpret the other taillight functions to know when the brakes are being applied. Basically it's two different ways to accomplish the same…

view full answer...

Answer 7

While the EcoHitch part #306-X7369 is a 2 inch hitch, it does have lower weight capacities more associated with 1-1/4 inch hitches of 2,000 lbs trailer and 300 lbs tongue weight, since this hitch is designed to fit a lower capacity tow vehicle, the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Trailer Hitch for a 2020 Toyota Prius

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching