Will Draw-Tite Trailer Hitch 41901 Fit a 1994 Chevy C/K Series 3500 Crew Cab Dually Long Bed

Question

Question:

I have a 1994 Chevy 3500 crew cab dually 8foot box. the frame measures 37inch wide at the rear end of truck. will this hitch fit my truck. Truck has regular bumper.

asked by: Bob

0

Expert Reply:

The frame on your 1994 Chevy C/K series truck indicates that it is NOT a cab and chassis model (which normally have narrower frames) so you can use hitch # 41901. I have included a link to the installation instructions for you.

I also recommend etrailer ball mount # EBMK2416. It includes a ball mount, 2 balls, a hitch pin with clip, and a storage bag. If you need to add trailer wiring use # 118315.

expert reply by: Michael H

0

Answer 1

For your 1992 GMC C/K with a step bumper we have the Curt hitch part #C14081 which is a confirmed fit. This hitch requires you to temporarily lower the spare to install it but you can then reinstall it once the hitch is installed.

view full answer...

Answer 2

According to my contacts at Curt Manufacturing, if the spare tire on your 1991 GMC pickup is the stock size, the spare tire might need to be slightly repositioned toward the front of the truck. This is a simple process. Remove spare, and install…

view full answer...

Answer 3

I went out to the warehouse to take some measurements of Curt trailer hitch #C14082. I made a picture showing the measurements for you. The bolt holes, starting from the one furthest forward on the vehicle, measures 2-3/4 inches to the center of…

view full answer...

Answer 4

We don't have any hitches that are confirmed to fit on the CUCV M1008 military truck, but from what I was able to find out is that it's a version of the Chevy C/K series trucks that were manufactured for civilian use. You may be able…

view full answer...

Answer 5

Based on your information, I recommend the Draw-Tite Class IV Ultra Frame Hitch, Item #41901, which is a confirmed fit for your 1997 Chevrolet C/K Series Pickup with standard bumper. This hitch is specially designed for heavy-duty towing with a…

view full answer...

Answer 6

The hitches that are listed for the 1998 GMC trucks with 34 inch frames are the ones that are designed to fit the cab and chassis models. The #C14081 that you referenced would work well on your truck with a 37 inch frame since it is not a cab and…

view full answer...

Answer 7

The measurement from the top of the mounting bracket down to the top of the receiver tube measures 5 inches. Curt trailer hitch #C14082 is a custom fit hitch designed to fit the following vehicles: 1973 - 2000 Chevrolet C/K Series Pickup Cab and…

view full answer...

Answer 8

Yes. I've linked a picture of a Chevy C Series with the under-mounted spare tire to show you, but the Curt #C14082 will work with the stock spare tire mounting location on your 1971 C Series pickup and you won't need to make any modifications…

view full answer...

Answer 9

Yes, the Curt trailer hitch part #C14081 that you referenced does fit a 1999 Chevy C3500 dually crew cab. The picture I attached shows a review where someone has installed the hitch on a similar 1999 Chevy C Series.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...