Recommended Trailer Hitch Receiver For 2022 Nissan Frontier

Question

Question:

I have a 2022 Nissan Frontier and am looking for a trailer hitch receiver. What do you recommend?

asked by: Bruce W

0

Expert Reply:

For your 2022 Nissan Frontier I recommend going with the etrailer Trailer Hitch Receiver # e98869. This hitch is a perfect fit for your vehicle and it has a 500lb tongue weight and 5000lb trailer weight rating, or an 800lb tongue weight and 8000lb trailer weight rating if using a weight distribution hitch making this a very versatile hitch.

I really like how well the matte black powder coat finish blends in to the rear of your truck compared to the gloss black finish used on other hitches.

I included an installation video of the # e98869 for you to take a look at.

expert reply by: Samuel C

0

etrailer Trailer Hitch # e98869 Installed On Nissan Frontier
(click to enlarge)

Answer 1

I checked with our vendors and the only option to purchase the relay you need for your 2022 Nissan Frontier is to get the Curt T-Connector Vehicle Wiring Harness item #C56225. This includes the necessary relays that Nissan leaves out when building…

view full answer...

Answer 2

The etrailer Trailer Hitch Receiver part #e98869 which is a fit for a 2012 Nissan Frontier is rated for 5,000 lbs or 8,000 lbs with weight distribution. If the trailer is under 5,000 lbs loaded then you will be fine without weight distribution but if…

view full answer...

Answer 3

The relay location on Nissan vehicles can be interesting. A lot of times on the Frontier it's behind the kick panel on the passenger side like where you checked but the other common location is under the dash to the left of the steering wheel…

view full answer...

Answer 4

Sometimes in shipping the install brackets of a hitch can get slightly bent. As long as there are no flex marks on the hitch or chipped paint from the hitch flexing you can bend the hitch back to get it to line up. Otherwise it can be helpful to…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...