etrailer.com Trailer Hitch Installation - 2019 Nissan Frontier Video

On the Nissan Frontier and other Nissan vehicles, if the vehicle did not come with a factory tow package it will not have a functioning wiring harness even if one, like #118263, is added. There will be relays that will need to be inserted to make the…

For your 2022 Nissan Frontier, I recommend Wiring Harness #C56225. As far as a hitch goes we do have a few options for your truck, however, I recommend one of best sellers, the etrailer Trailer Hitch Receiver #e98869. This is a custom made class III…

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver item #75282 is a confirmed fit for your 2022 Nissan Frontier. It has a maximum gross trailer weight of 5,000 lbs and a maximum tongue weight of 750 lbs. I have attached an installation video and…

The relay location on Nissan vehicles can be interesting. A lot of times on the Frontier it's behind the kick panel on the passenger side like where you checked but the other common location is under the dash to the left of the steering wheel…

Yes, the hitch pin part #PC3 will work to secure the hitch adapter part #MT70033 that you referenced. Your best option though would be the part #63232 which has an anti-rattle device built into it as well as a hitch lock. I attached a review video…

Installation of the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56225 that fits your 2019 Nissan Frontier (without a factory connector) is very straightforward, but installing a harness on a Nissan does require the use of…

So you will need to access the 12 pin jumper plug in your Frontier's cab, which as you said is on the passenger’s side behind the kick panel. This is where you will install the harness and relays that activate the trailer tow package, and the…

We don't have a separate article for the issue you described but I can give you all the info we have on it. The issue is that the electric brake signal wire and the 12V battery charge wire are reversed in the main vehicle harness. This is the…

We have heard of the issue you are experiencing and it is related to the black 12 volt power wire and the blue electric brake wires on the vehicle. It is not very common, but it has come up before. The problem is that the factory tow package…

I am sorry to hear that the factory 12v power and trailer brake wires on your Nissan Frontier are crossed! Luckily this issue is an easy fix, by removing the wires from the 1 o'clock 12v power pin, and 5 o'clock trailer brake pin on your 7…

The Class III #75282 Draw-Tite Trailer Hitch that you are interested in does comes with the six bolts needed to secure the hitch to the existing weld nuts in the frame. All of our hitches are shipped with the necessary installation hardware. If you…

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75282 requires all hardware be torqued to 68 foot pounds according to the instructions. I've attached a photo in case you need anything else for this installation…