Summer Starts Here - Save up to 70%
7" Wide x 22-1/2" long x 8-1/4" tall. This sturdy, rounded fender protects your trailer from road debris. 16-Gauge, ribbed steel with double-radius edges is durable. Bolt or weld onto your trailer.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today I'm been take a look at this etrailers single axle steel trailer fender with the ribs for eight inch wheels. It is for a quantity of one fender. Now this rounded fender will cover one tire on your single axle trailer. It'll act as a splash guard, helps keep any road debris from hitting other vehicles, and it'll also help protect your trailer's cargo.
I'm going to zoom in. If you notice on this one, I'm want to show you the edges. Both the inner and outer edges on this have a one inch curve radius lip. Gives it a nice clean finished look to it, and it is a sturdy ribbed 16 gauge cold roam steel construction in a raw finish.Now this can be primed and then painted to provide even more resistance for corrosion and to match your trailer's paint finish. Do you notice the two ribs right on here They are stiffener ribs.
They are designed to help eliminate flexing of the fender. Now this is a weld-on or bolt-on installation. It is not pre-drilled. The mounting brackets for bolt-on installation are sold separately. This part is made in the USA.
It is for a quantity of one fender. Application, again, is for single axle trailers with eight inch wheels. Weight on this is about five pounds, and the last thing I want to do is just give you some dimensions on this. The overall length from this end to this end, is going to be right at 21 and three quarter inches long. The height from very bottom to very top is right at eight and a quarter inches tall, and the total width right at seven inches wide, but that should do it for the review on etrailer single axle steel trailer fender with the ribs for eight inch wheels for a quantity of one..
Average Customer Rating: 4.8 out of 5 stars (2486 Customer Reviews)
7" Wide x 22-1/2" long x 8-1/4" tall. This sturdy, rounded fender protects your trailer from road debris. 16-Gauge, ribbed steel with double-radius edges is durable. Bolt or weld onto your trailer.Nice and thick and bead roll ands some nice pizazz
Product is good quality and the service was excellent
SUPPER fast shipping.Great customer ser vice
fenders are actually sturdier than expected and arrived early very satisfied
Very well made. I added some more bar tacks to bond the backing plate to the fender. It probably would have been fine as is, but for three minutes of effort I know that the two won't separate. I built a T out of 1" tubular steel to mount it to the trailer and there is no flex, once I welded it all together. Arrived clean enough to paint (but I still wiped it down with isopropyl alchohol before painting).Nice heavy gauge fender.
These Trailer Fenders are a quality product which are "rust free". It's hard to find an 8" rust free wheel fender on-line. All stainless steel fenders listed on line require you to paint them so they will not rust. This is because since they were stamped/pressed via large machine press at the manufacturing plant, using a flat sheet of stainless steel. When the sheet is pressed it's damaged and will rust.
I used these steel fenders to replace aluminum fenders on my utility trailer after one had fallen off along the road somewhere. Prior to installing these I painted them with Krylon Fusion gloss hammered metal spray paint, which has held up well.
Great looking and functioning fenders. Really thought I would never find fenders for a 1993 boat mate trailer that would fit but these fenders fit great. Sure made my trailer look better.
These fenders were to replace the rusting out fenders on my Four Winns boat trailer. They really spruced it up! The only "modification" I had to do was add an extra 3/8 nut on both sides between the fender and the trailer frame to make it fit. I used all new stainless steel fasteners.
I put two of these fenders on my canoe trailer. Both broke before I'd gone 1,000 miles.
This is an exact replacement for another product that I previously purchased with a back plate for my father's homemade boat trailer. I lost the fender on a long haul of his boat, but not the back plate. I was able to bolt on the original back plate. I am completely satisfied with this product.
Item arrived quickly, well packaged and in perfect shape! Worked perfect for my jetski trailer.
Two new fenders worked out fine. I had replaced the original new fenders on my trailer that I didn't like. I made and welded on my own inner fender out of 16ga material and 11ga floor plate for steps/gussets.
I looked at pretty much every source for purchasing utility trailer fenders in the size range needed. My concerns were tire coverage and fit on a 4x5 trailer. The rounded fenders are far more common than the Jeep style, I found. In the end, these were the best price and concurrently the best gauge of steel - weldable. They look solid. No issues once I laid eyes on the fenders.
I purchased a setof Single axle trailer fenders for my utility trailer about a year agl. etrailer provided good measurements that I thought would fit the existing mounting brackets and I was happy to see that they were a perfect fit. I cleaned and painted the fenders before I mounted them and after a year they still look great. I am quite pleased with the purchase and the information provided by etrailer.
Quick delivery. Solid metal fender. Easy install with screws or could use L brackets. Great value for price.
Worked great. snug but fits 275/75/r18 (~33in) tires so I can match my tow vehicle. overlanding trailer build. Originally done in exterior black semi gloss. After chipping following 3k mi swapped coating to primer + two coats of truck bed liner which has adhered really well. Durable. When well supported they can work as a step for me. I did mod them to bring them down in width to form better for my application (would have been too wide, extending 3in past the tire). Responded well to being trimmed. Applied typical rubber-coated 1/8in edge trim to cut side where that met the trailer wall. While not precisely the right item for my unique/custom application, its durability and workability to fit my project was great.
I welded and bolted it with mounting brackets on my tow dolly. I painted it with a primer and then a glossy black. Added tail lights and front markers. Good solid fender
I’m very satisfied with the overall outcome of ordering my trailer fenders from the online order process to there timely delivery. Of most importance was the quality of the fenders. They were made of heavy gauge sturdy steel. I’ve been closed some photos showing the final product after painting. I would definitely order again if necessary. Thanks trailer.
Was told order would arrive last Friday. It partially did. Called and was told other fender would be shipped out of another location and would arrive by Tuesday. The first one came smooth, the second ribbed. Need this resolved so I have a match.
The fender worked well for my custom ap plication
I really like the ribbed striations in the fender when I saw it in person. They add a little style to the part and they also add a little strength. I think they'll look very good when painted.
Four stars only because the fenders will need a little attention. The very ends need a little a few minutes of work to flatten them completely. That's a natural problem with rolled steel parts and it's easy enough to fix with a block of wood and a small hammer.
Most people wouldn't bother with this or might not consider it to be a problem at all but I'll square up the ends in just a few minutes before they get installed and painted.
The edges are sharp too. Again, a few minutes to dress them with a sander will get the sharp ends smoothed up. I've never seem a steel trailer fender that didn't need these two touch up items.
They're nice fenders but they aren't quite ready to paint as far as I'm concerned.
The welds on one of the first 2 fenders failed within the first week and I reinforced the welds on the replacement fender you provided. So far the replacement fender is working well.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.