etrailer Class III Trailer Hitch Installation - 2022 Nissan Frontier Video

For your 2024 Nissan Frontier I recommend the etrailer Trailer Hitch Receiver #e98869. This is a Class III hitch with a 2" receiver and a max gross trailer/tongue weight of 5,000/500 lbs. This hitch also features a matte black powder coat…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

For your 2011 Nissan Frontier the Draw-Tite #75282 and the Curt #13241 are both considered a compatible fit. All the hitches that you have listed are Class III hitches are are of a high quality and have the same ratings for gross towing weight and…

I did some checking and your 2016 Nissan Frontier, 4WD can be flat towed as-is if the vehicle has a manual transmission or if you have an automatic transmission you'd need a driveshaft disconnect. We carry basically everything but the drive shaft…

So you will need to access the 12 pin jumper plug in your Frontier's cab, which as you said is on the passenger’s side behind the kick panel. This is where you will install the harness and relays that activate the trailer tow package, and the…

Correct; the holes will already be there on your 2019 Nissan Frontier when installing any of the trailer hitches that fit this truck. If you take a look at the accompanying photo you can see where these holes are being pointed out by our installer.…

I checked with our vendors and the only option to purchase the relay you need for your 2022 Nissan Frontier is to get the Curt T-Connector Vehicle Wiring Harness item #C56225. This includes the necessary relays that Nissan leaves out when building…

That you have the Curt Wiring Harness with 4-Pole Flat Trailer Connector, #C56225, is the first needed step. If you have not already installed this, please note the linked installation video below for assistance. The next item needed is the Universal…

Yes, the Draw Tite hitch part #75282 is a confirmed fit for your 2009 Nissan Frontier and will work just fine with a full sized spare like what you see in the picture I attached.

The 4-Way connector just press fits into the bracket and keeps the connector secure. There are small ribs on the connector that help hold it in the bracket. The cap also goes around the connector to help secure the 4-way just in case it gets knocked…

For your 2022 Nissan Frontier, I recommend Wiring Harness #C56225. As far as a hitch goes we do have a few options for your truck, however, I recommend one of best sellers, the etrailer Trailer Hitch Receiver #e98869. This is a custom made class III…