Do You Carry Front Receiver Hitches for My 2015 Mercedes-Bens Sprinter 3500?

Question

Question:

can you help to find a front receiver hitch for a Sprinter 2015 2wd 3500

asked by: Gregory B

0

Expert Reply:

I have a solution for you. Unfortunately, we do not carry a front-mounted hitch option for your 2015 Mercedes Sprinter 3500.

With that being said, your best bet is to use a rear hitch receiver like the Curt Trailer Hitch Receiver # C13388 (for 144 and 177 inch wheelbases with the standard bumper) or the Draw-Tite Max-Frame Trailer Hitch Receiver # 75601 (for 144 and 177 inch wheelbases with the factory step bumper). Both of these hitches come with plenty of tongue weight capacity to carry accessories and transport cargo (600 pounds for the Curt and 500 for the Draw-Tite). In addition, both of these hitches include a hardware kit for a bolt-on installation. If you need a hitch pin and clip, I recommend the Curt Pin and Clip for 2" Hitches # C21504. With all of our rear-mounted hitches for the 2015 Mercedes Sprinter 3500, we unfortunately do not carry any hitch receivers that fit models with the 30-3/8" frame. To make sure you do not have this model, I recommend measuring your frame from the outside to outside.

If you have any concerns about your rear doors opening with a rear hitch installed, we do have solutions that will allow you to fully open your rear doors with a hitch-mounted accessory installed. Feel free to reach out with what accessory you wish to use with your hitch, and I would be happy to find you a solution for that issue.

expert reply by: Bob C

0

Answer 1

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13388 is a confirmed fit for your 2012 Mercedes-Benz Sprinter. The reason the hitch does not fit models with 30-3/8" frame, measured outside to outside of frame is…

view full answer...

Answer 2

The mounting brackets of the hitches are totally different as the step bumper changes how the vehicle is setup. For your 2015 Mercedes Sprinter that has the 170 inch wheelbase and no step bumper the correct Curt hitch is the part #C13388. If…

view full answer...

Answer 3

We do have a trailer hitch that will fit your 2015 Mercedes-Benz Sprinter 2500 but the Curt C13388 does NOT fit models with a step bumper so instead you need the Curt Trailer Hitch Receiver #13358. This will fit your '15 Mercedes Sprinter…

view full answer...

Answer 4

The difference in the two hitches is what type of bumper they are designed to fit with. The vans had a standard rear bumper option and a step bumper option. The step bumper option gives you a step which allows you to climb into the back more easily.…

view full answer...

Answer 5

Your 2015 Freightliner Mercedes Sprinter 3500 with the 144 inch wheelbase and factory step bumper is indeed compatible with the Curt Trailer Hitch Receiver #13375. The brackets and step frame do fit together, as you'll remove the factory…

view full answer...

Answer 6

I do have options for you but the custom fit trailer hitches that you were looking at like the Curt Trailer Hitch Receiver part #13375 for a 2018 Mercedes-Benz Sprinter 3500 are not designed for the cab and chassis models like you have. Therefore, I…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

We do have a couple Class V hitch options available for your 2020 F53 and I have 3 options listed below. These will all be rated to 16,000 pounds towing and 1,600 pounds of tongue weight and use a 2" receiver opening. They will all also fit a…

view full answer...

Answer 9

We do carry universal hitches that are rated for 10,000 pounds and above, like the Draw-Tite part #41990-07. I've linked the selection. With that being said a lot of times when a motorhome is rated for 5,000 pounds towing it isn't the hitch…

view full answer...