Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(88 reviews)
Price: $243.73
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13388
Our Price: $243.73
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (88)
- Q & A (0)
- Photos
CURT Trailer Hitch - C13388
- Class III
- 2 Inch Hitch
- 6000 lbs GTW
- Visible Cross Tube
- CURT
- 600 lbs TW
- 10000 lbs WD GTW
- 1000 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 6,000 lbs
- Maximum GTW when used with weight distribution: 10,000 lbs
- Maximum tongue weight: 600 lbs
- Maximum TW when used with weight distribution: 1,000 lbs
- Maximum gross trailer weight: 6,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13388 Curt Class 3 Trailer Hitch Receiver
Replaces Curt 13255
Installation Details
This Product Fits The Following Vehicles
- 2007 - 2009 Dodge Sprinter 2500 Van - 144 inch Wheelbase - with standard bumper
- 2007 - 2009 Dodge Sprinter 2500 Van - 170 inch Wheelbase - with standard bumper
- 2007 - 2009 Dodge Sprinter 3500 Van - 144 inch Wheelbase - with standard bumper
- 2007 - 2009 Dodge Sprinter 3500 Van - 170 inch Wheelbase - with standard bumper
- 2007 - 2015 Freightliner Sprinter 2500 Van - 144 inch Wheelbase - with standard bumper
- 2007 - 2015 Freightliner Sprinter 2500 Van - 170 inch Wheelbase - with standard bumper
- 2007 - 2015 Freightliner Sprinter 3500 Van - 144 inch Wheelbase - with standard bumper
- 2007 - 2015 Freightliner Sprinter 3500 Van - 170 inch Wheelbase - with standard bumper
- 2010 - 2015 Mercedes-Benz Sprinter 2500 Van - 144 inch Wheelbase - with standard bumper
- 2010 - 2015 Mercedes-Benz Sprinter 2500 Van - 170 inch Wheelbase - with standard bumper
- 2010 - 2015 Mercedes-Benz Sprinter 3500 Van - 144 inch Wheelbase - with standard bumper
- 2010 - 2015 Mercedes-Benz Sprinter 3500 Van - 170 inch Wheelbase - with standard bumper
- 2016 - 2021 Freightliner Sprinter 2500 144 inch Wheelbase - with standard bumper
- 2016 - 2021 Freightliner Sprinter 2500 170 inch Wheelbase - with standard bumper
- 2016 - 2024 Mercedes-Benz Sprinter 2500 144 inch Wheelbase - with standard bumper
- 2016 - 2024 Mercedes-Benz Sprinter 2500 170 inch Wheelbase - with standard bumper
- 2016 - 2021 Freightliner Sprinter 3500 144 inch Wheelbase - with standard bumper
- 2016 - 2021 Freightliner Sprinter 3500 170 inch Wheelbase - with standard bumper
- 2016 - 2024 Mercedes-Benz Sprinter 3500 144 inch Wheelbase - with standard bumper
- 2016 - 2024 Mercedes-Benz Sprinter 3500 170 inch Wheelbase - with standard bumper
Weight Carrying Capacity
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Tech Tip
Hitch does not fit Passenger vans, and does not fit models with 30-3/8" frame, measured outside to outside of frame. Drilling required for installation
Complete Towing Package for 2023
Package Price:$281.19
Customers Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular Trailer Hitch Accessories
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13388
Average Customer Rating: 4.7 out of 5 stars (88 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Walt05/05/2023
I've ordered a couple products from etrailer.com in the past and as usual their customer service is Outstanding! This time I ordered the Curt Trailer Hitch Receiver (Item # C13388) for my 2023 Sprinter 144 Crew van. Paul B and Teresa T were very quick in returning my emails and calls when I received the first hitch in damaged condition. They apologized for the inconvenience and sent me a replacement immediately. Unfortunately the replacement hitch was also damaged on most of the edges, but not as extensive as the first shipment. Both times the shipping box was blown out on each side in multiple places. I learned from talking with Paul B at etrailers.com that the damage to the edges of the hitch originates from the way the manufacturer ships the product to them in a stacked arrangement. Don't be surprised if your hitch arrives protruding from the box in multiple places from bouncing around unpadded inside during shipment. I think some extra cardboard padding on all the steel edges and/or a more heavy duty shipping box would help greatly.
Be prepared to repaint several spots on your new hitch, unless you want the rusting process to begin prematurely.
5-stars for customer service. 3-stars for product arrival.
The hitch itself is fairly straightforward to mount. For this design/model I would recommend an initial "mock-up" mounting of the hitch so you can accurately mark and drill the two under-frame holes for the 1/2" carriage bolts. Dropping the spare tire isn't necessary, but you will want to disconnect the exhaust pipe from the hanger and secure it off to the side to allow room to work. I would also suggest to drill the two under-frame holes 5/8"- 11/16" to make the "fishing" process of the spacer and 1/2" carriage bolt go much smoother. Drilling the frame with a metal bit goes much easier than expected. The instructions do not give any guidance as to what size these holes should be drilled. Install did not take more than 1hr including drilling.
by: Cameron06/22/2023
The hitch mount was very easy to install! I have never had to fish a bolt through a frame before and that ended up being pretty straightforward. I had to buy a 5/8" metal bit to drill the holes which was easy enough. I do wish the directions mentioned what size bit to buy, but since the bolts are 1/2", it would make sense anything larger than 1/2" would work. Overall, great product from etrailer and an even better experience! Nice work team! Also, shoutout to Carol C for the follow up email!
by: Michael 08/21/2023
Mercedes-Benz Sprinter
I bought this a year ago for my Sprinter and it has worked well. It handled a 5000# car trailer with no problems and I appreciate the minimalist design compared to the factory hitch. I sprayed on an extra layer of bedliner and there hasn't been a speck of rust despite copious salt use in my neck of the woods.
by: Daniel02/13/2024
I installed this myself and it went very smoothly and a year later it is still rock solid and towing strong.
by: Dylan 12/05/2023
Ram 2500
I installed on 2500 sprinter model. I didnt realize you have to cut an access hole for 2 bolts with that model but other than that easy install with 2 people.
by: OuterCulture01/12/2021
2019 Ram 2500
The product is solid, like every other hitch I've got from etrailer.com.
It was easy to install on my 2019 Sprinter van 2500. The instructions were straight forward and it didn't take a very long time to install the hitch (Maybe 20min total)
I really like the way it seats underneath the bumper
by: Scott06/22/2020
2019 Mercedes-Benz Sprinter 2500
Super easy install and perfect fit for my 2019 Sprinter 2500. Given that my intended use for the hitch was to attach a bike rack or additional storage, versus towing, I did not install the additional bolts that require drilling. Looks great, low profile
by: Eric06/01/2020
2019 Mercedes-Benz Sprinter 2500
The product was shipped in a really heavy duty box but still came pretty banged up. The instructions were good but this was supposed to be a bolt-in product. One of the holes needs to be drilled but since the entire frame is boxed I can't get the hardware through the other side.
by: Jian01/23/2024
super cost and delivery time
by: Joe08/21/2020
Well thought out and engineered. Quality manufacturing. Please continue to offer and stand behind the best products. ‘NoAmazon’ for me. Straight to eTrailer.
by: Chris11/19/2020
Greta fit. Easy Install. Quick shipping. Did exactly what I needed it to. Seems well manufactured. Company was very responsive.
Chris
11/19/2021
1 year later, still a great fit, product has held up well. Has been used regularly and required no maintenance.
by: Charles 11/30/2023
easy install and fit perfect
by: Michael09/08/2023
Packaging not good! Heavy scratches on bottom and a little on face not pleased at all / I don't have time to return I'll have to sand & paint. Leaving on trip!!!!! The product itself is great.
by: Mark 04/21/2021
2019 Mercedes-Benz Sprinter
Installed on a 2019 Sprinter 4x4 for approximately a year, then removed it to install an Aluminess bumper/receiver/storage box/spare tire kit. There is a lot to like about this Curt receiver. The fit and finish are up to Curt's usual standards, and I like how the Curt receiver required drilling two vertical holes in the subframe to provide additional points of contact for the hitch receiver. I would trust the Curt receiver more than the Aluminess bumper/receiver/etc when towing a trailer with a weight-distribution hitch. However, because we need external storage and a second spare tire more than we need the ultimate Class III receiver, I removed the Curt. This is not a criticism of the Curt, and I don't regret the purchase.
by: Brian06/30/2022
Stout hitch that matches the quality of the factory unit. My van came with a factory hitch which I sold when I installed an aluminess bumper. After realizing the massive flaws with the aluminess bumper I tried to find another factory hitch for a decent price. Failing I bought this. Very impressed with this hitch. My bikes bounce less on this hitch than the factory unit. The 600lb tongue probably has something to do with it either way a great alternate to a very expensive Mercedes’ unit. S always etrailer is a great outfit.
by: Keith O.09/27/2017
Mercedes-Benz Sprinter
For '09 Sprinter 3500. Good product, good fit. Less prone to rust than other brands.
Includes Grade 8 bolts. With other brands, I have had to purchase grade 8 bolts, because only grade 5 were included.
I only pull fairly light trailers. I wouldn't anticipate any problems with any size trailer.
A tab on the drivers side for the lights plug would be helpful. Self tapping screws in the side worked fine though.
If thread lock tape or liquid was included, that would be nice.
Thanks for providing a quality product and a reasonable price and super fast shipping.
etrailer is always great to do business with.
Thanks,
Keith
by: Mark06/20/2022
Very solid hitch, well made. It took me about 3 hours to install. Requires drilling two holes on the underside of the vehicle frame, the using a wire to fish the bolts into the frame of the vehicle. I could not accomplish the install until I modified the provided tool by adding an additional two foot section of bailing wire to the provided tool. I had some difficulty with understanding the provided instructions. The instructions could be a little more user friendly. Overall, I am very pleased with the this hitch and how it is installed on the vehicle.
by: Peter08/23/2021
Product worked as described and at a good price. Shipped and arrived quickly. The box was beat up and hitch was coming out of it when it arrived. This meant that the hitch was scuffed, chipped, and a bit beat up when I got it, which was disappointing.
Sierra K.
8/31/2021
I apologize about the scuffed hitch. Next time something is damaged in shipping please contact etrailer.com within the return policy timeframe of 60 days. You will want to cover the scratches with anti-corrosive spray paint to keep rust at bay.
Helpful Links
by: Marco10/01/2021
2007 Dodge Sprinter
My van had most of the holes pre-drilled.
Got it installed in under an hour with the help of the buddy.
Five stars
by: Lee12/14/2020
2008 Dodge Sprinter
the Curt hitch for my Sprinter 2500, 144WB is great. It bolts right on and the only questionable part is drilling into the frame with ? drill bit. That a pretty big drill bit and the website doesn't tell you the drill size needed, but does mention "drilling required". Other than that all went smoothly. All hardware provided and the hitch was packaged very well. Hard to beat etrailer for quick and free shipping !
by: Nick 09/27/2021
Ram 2500
The installation instructions don't exactly work for a 2021 Sprinter 2500. The access hole to fish the vertical hardware through doesn't exist as the instructions point out. There is a smaller hole on the side of the rail, but it would have to be made larger to fit the bolt head through. Even if it was made larger I wasn't convinced the plate would fit through, given how long it is, and I didn't want to add another hole to the bottom of the rail. Instead I opted to not install the vertical hardware, though I'm not sure what impact that has on the rating of the receiver. I don't plan on towing anything too heavy, but if you are, I can't recommend this receiver for this van.
by: Jots10/04/2021
2015 Mercedes-Benz Sprinter
Curt Hitch was self installed in about an hour. Did not run into any difficultly. I used a small car jack to help me lift up the hitch into place so that I can push the bolts through the holes. All-in-all a pretty smooth process. The hitch fit 2015 sprinter without factory rear step very well and looked good.
by: Asbel01/28/2023
Arrived within 2 days and fit perfectly. Installation took 30mins.
by: Steve 04/29/2021
2019 Mercedes-Benz Sprinter
Fits good. wish the hitch had the extra bolt hole to match my 2019 sprinter van frame. I drilled the extra hole on each side of the hitch and added a fourth bolt, to match the 4 holes on the frame.
25
96
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- What is the Difference in the two Hitches part # C13388 and # 13375The difference in the two hitches is what type of bumper they are designed to fit with. The vans had a standard rear bumper option and a step bumper option. The step bumper option gives you a step which allows you to climb into the back more easily. The Curt Trailer Hitch Receiver part # C13388 is designed for the vans that have the standard rear bumper. The side plates on this hitch are shorter than they are on the Curt Trailer Hitch Receiver part # 13375 which is designed for use on...
view full answer... - Will the Curt Trailer Hitch # C13388 Fit a 2010 Mercedes SprinterThe Curt Hitch # C13388 is confirmed as a fit for the 2010-2015 Mercedes Benz Sprinter 2500, 144- inch wheelbase with a standard bumper. For a complete towing set up you may be interested in the following items: Etrailer Ball mount kit # 989900 - includes 2 ball mounts, 1 1-7/8 inch trailer ball, 1 2-inch trailer ball, a pin and clip, and a bag. Wiring Harness # C59496 - includes a circuit tester, quick connectors, and a fused power wire. Check out the helpful article that I have...
view full answer... - Difference Between etrailer & Curt Trailer Hitch For 2023 Mercedes Sprinter 2500 Cargo VanThere is just a single difference between the Curt and etrailer trailer hitches that fit your 2023 Mercedes-Benz Sprinter 2500 Cargo Van, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you prefer. The hitches that fit your Sprinter 2500 are the following part numbers: - etrailer Trailer Hitch Receiver # e76AR - Curt Trailer Hitch Receiver # C13388 The matte black finish is nice as it hides the inevitable...
view full answer... - Can Tongue Weight Capacity Be Increased To Haul Motorcycle On a 2018 Mercedes Sprinter 2500 4x4The highest rated trailer hitch we have for a 2018 Mercedes-Benz Sprinter 2500 4x4 with 170" Wheelbase is the Curt Trailer Hitch Receiver part # 13358 if you have the factory step bumper which is rated for 5,000 lbs gross trailer weight and 500 lbs tongue weight or the Curt Trailer Hitch Receiver part # C13388 if you have the standard bumper which is rated for 6,000 lbs gross trailer weight and 600 lbs tongue weight. Unfortunately, there isn't any way to strengthen the tongue but the factory...
view full answer...
- Trailer Hitch Recommendation for 2015 Mercedes Benz Sprinter 170 inch WheelbaseYes we do have a hitch that fits your vehicle. You would want the Curt hitch part # C13388 which is confirmed as a fit for your 2015 Mercedes Benz Sprinter 170 inch wheelbase without step bumper. I have included a video of the hitch installation to help you along.
view full answer... - Which Curt Hitch Fits 2013 Freightliner Sprinter 2500 170 inch WheelbaseWe do have a Curt hitch that fits your 2013 Mercedes Benz 2500 with a 170 inch wheelbase and a factory bumper with the part # C13388 but the # 13375 only fits the shorter wheelbase versions.
view full answer... - Troubleshooting GearSpace 34 with Hitch Extender Sagging on 2020 Mercedes-Benz Sprinter 3500From the pictures you sent it looks like your setup is overloaded. It is important to remember that the use of an extender like this will reduce the capacity of your hitch by 50%. That means if you have a hitch like the Curt # C13388, your maximum tongue weight has been reduced from 600 lbs to 300 lbs. If your hitch has a 500 lbs maximum tongue weight it will be 250 lbs with the extender. According to the manufacturer, the minimum tongue weight rating for your hitch must be 350 lbs in...
view full answer...
- Van build and Recommended Receiver Hitch for 2021 Mercedes-Benz Sprinter 2500If your 2021 Mercedes-Benz Sprinter 2500 has the factory step bumper, I suggest the Curt Trailer Hitch Receiver, # 13358. If you have the standard bumper, then the Curt Trailer Hitch Receiver, # C13388. Both of these are Class III hitches that are fully welded in their construction and have received an excellent powder coated finish. They are a bolt-on installation and each will fit the long or short wheel base version, type bumper that is in place is the deciding factor for over the...
view full answer...
- Does The Spare Tire Need To Be Removed to Install Curt Hitch On 2019 Mercedes-Benz Sprinter 2500According to Curt you will not need to remove the spare tire when you install part # C13388 as long as it is a standard spare tire size. As long as the 2019 Mercedes-Benz Sprinter 2500 is a 170 or 144 inch wheel base, standard bumper and is not a passenger van this hitch is confirmed to fit without removing the spare tire. If you need wiring, I recommend Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter part # TK22115 because it is the easiest way to install...
view full answer... - Trailer Hitch Recommendations for a 2018 Freightliner Sprinter 3500 Chassis with 170" WheelbaseThere are a few different options depending on what kind of bumper your 2018 Freightliner Sprinter 3500 Chassis comes with. If you have the factory step bumper I recommend the Curt # 13358, if you have the standard bumper then I recommend the Curt # C13388, and if you don't have the factory step bumper then I recommend the Draw-Tite # 75549. Please note that none of these will fit if you have a 30-3/8" frame measured from the outside to outside of your frame. The installation details...
view full answer... - Could Step Bumper of 2014 Mercedes Sprinter be Removed and Hitch InstalledCurt does have a hitch that fits the 170 inch wheelbase versions of the 2017 Mercedes Benz Sprinter vans but it's not the part number you mentioned as it's actually the part # C13388. This requires frame drilling if the van is a 2500 model and would fit as long as your frame doesn't measure 30-3/8 inches from outside to outside. I attached a picture of the hitch installed to show the ground clearance.
view full answer...
- Hitch Recommendation for 2021 Mercedes Benz Sprinter 2500That depends on the bumper of your 2021 Mercedes Benz Sprinter 2500. If you have the standard bumper (regardless of wheelbase) you'd want the Curt hitch part # C13388 or if you have the factory step bumper you'd want the part # 13358 and you'd have the easiest installing hitch with the best towing capacities.
view full answer... - What is the Height of the # 59502 from the Top of the Shank to the Top of the Railing?From the top of the shank (the part that goes into the hitch receiver) to the top of the railing of the 22x59 Rola Cargo Carrier for 2" Hitches 59502, it is about 6-3/4 inches high. If the Rola Cargo Carrier is too high for you to open the doors on your 2021 Sprinter 2500 chassis, there are other cargo carriers that do not the added 2-inch rise of the Rola carrier. For a solution of a carrier that doesn't have rise in the shank and is RV approved, I recommend the 23x59 Stromberg Carlson...
view full answer...
- Recommended Hitch for 2024 Mercedes-Benz Sprinter 2500 With Long Wheelbase and Standard BumperFor your 2024 Mercedes-Benz Sprinter 2500 I recommend the Curt # C13388. This is a Class III hitch with a 2" receiver and a bolt-on installation. This hitch has a max gross trailer weight of 6,000 lbs and max tongue weight of 600 lbs. It also comes with a limited lifetime warranty. If you plan on towing you will also need wiring. The Curt # C59236 taps into your existing wiring with the included quick-splice connectors. This will provide you with a 4-way to power your trailer's signal lights.
view full answer... - Which Versions of 2015 Mercedes Sprinter Does Curt Hitch # C13388 FitThe Curt trailer hitch # C13388 fits the following versions of the 2015 Mercedes Sprinter vans: 3500 Van - 170 inch Wheelbase - with standard bumper 3500 Van - 170 inch Wheelbase - with standard bumper 2500 Van - 170 inch Wheelbase - with standard bumper 3500 Van - 144 inch Wheelbase - with standard bumper Since you have the factory step bumper you'll have to go with the Curt # 13358 since your frame is different and requires a different hitch fit.
view full answer... - Recommended Trailer Hitch for 2007 Dodge Sprinter 2500 with 170" WheelbaseIt's likely you actually have a 2007 model year as that is when the longer 170" wheelbase was used and in which case you can use the Curt Trailer Hitch Receiver part # 13358 if you have the factory step or part # C13388 if you just have the standard bumper.
view full answer... - 2021 Mercedes-Benz Sprinter 2500 Wiring Mounting Bracket Options for Curt Trailer HitchTo hang a wiring connector from the Curt Trailer Hitch Receiver # C13388 on your 2021 Mercedes-Benz Sprinter 2500 you need a No-Drill Mount Bracket # C57202 and then you can use the Bracket # 18144 for the 4-Way # C59236 or the Bracket # 18138 for the 7-Way # TK22115.
view full answer... - Recommended Trailer Hitch Receiver And 7-Way Wiring Harness For A 2021 Mercedes-Benz Sprinter 2500For your 2021 Mercedes-Benz Sprinter 2500 I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13388. This fully welded trailer hitch receiver bolts onto your Mercedes-Benz Sprinter 2500's frame with no welding required. It has a gloss black powder coat finish over protective base coat offers superior rust resistance and is known to last longer than the powder coating of its competitors. For the 7-way you'll need to first install a 4-pole connector, for this I...
view full answer... - Trailer Hitch Fit for 2019 Mercedes-Benz Sprinter 2500 with 170 Inch Wheelbase and Standard BumperThere isn't going to be any noticeable difference in the fit between the Draw-Tite Trailer Hitch # 75549 and Curt Trailer Hitch # C13388 that fit your 2019 Mercedes-Benz Sprinter 2500 with a 170 inch wheelbase and standard bumper. The reason for that is both hitches install in the exact same spot on the frame, and both will be about flush with the bumper on your Sprinter. Both hitches have a 6,000 lb towing capacity and 600 lb tongue weight capacity but the biggest differences are that...
view full answer... - How to Add Wiring Connector Bracket to Curt Motorhome Trailer Hitch ReceiverThe pre-existing bracket you're referring to is something I've only seen Draw-Tite do with their hitches, but we still have a way to add the same type of bracket pretty easily to your Curt Trailer Hitch Receiver # C13388. For your application you're going to need the Curt No-Drill Bracket # C57202 and then one of the following depending on what type of wiring connector you have on your motorhome: - 4-Way Connector # C42CR - 7-Way Connector # C67UR
view full answer... - Hitch and Lock for 2022 Winnebago Revel MotorhomeSince the 2022 Winnebago Revel is built on a long wheelbase Mercedes Sprinter chassis you could use the Curt hitch part # C13388 for a hitch and then for a hitch lock the # HRLHP2 would work great.
view full answer... - What Hitch Receiver Will Fit My 2020 Mercedes-Benz Sprinter 2500Yes, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part # 13358, will fit your 2020 Mercedes-Benz Sprinter 2500 if it is either the 144" or 170" wheelbase with the factory step bumper. This hitch receiver has a maximum tongue weight of 500 lbs and a maximum gross trailer weight of 5,000 lbs. If you have the standard bumper, you will need Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part # C13388, instead. This hitch receiver has a maximum tongue weight...
view full answer... - Recommended Trailer Hitch Receiver for a 2003 Freightliner SprinterI do have a trailer hitch receiver for your 2003 Freightliner Sprinter but the Curt Trailer Hitch Receiver part # C13388 is only confirmed to fit a Sprinter from 2007-2018. As you have a 2003 the correct hitch for you is the Curt Trailer Hitch Receiver part # 14250. If you plan to be towing a trailer in the future then you will also need a wiring harness and ball mount/hitch ball. For a wiring harness I recommend using theh 4 Pole Trailer Connector part # C59496 and for a ball mount the...
view full answer... - Dimensions Of Curt Trailer Hitch Receiver # 13358 For a 2020 Mercedes Sprinter 3500The Curt Trailer Hitch Receiver # C13388 will not fit your 2020 Mercedes Sprinter 3500XD with the 170" wheel base. I measured the receiver in our shop and it 33-1/2" wide between the frame rail mounting points. We do also have the Curt Trailer Hitch Receiver # 13358 that mounts to the outside of the frame. While Curt has not been able to confirm that this will fit on an XD version of the Sprinter 3500 you can check your frame outside width to see if it has the same width. This receiver...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Ronnie R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victoria B.
6/10/2020
For your 2019 M-B Sprinter 2500, the bolt hole for the underside attachment point will need to be drilled. There should be a larger access hole into the box frame further up the frame. The hardware will then be fishwired through the larger access hole into the bolt hole to attach the hitch. I have linked the installation instructions for you.
Helpful Links
instructions.aspx?pn=C13388