Four bike Rack With An EcoHitch 306-X7286 For 2012 Honda Fit

Question

Question:

Hello! Looking to see if a EcoHitch 306-X7286 on a 2012 Honda Fit could support having a 4 bike platform rack. For example the Kuat NV 2.0 Bike Rack. Thanks. Also, one other question, the page for the #306-X7286 list tongue weight as 300 and 200. Torklift states that its 300. Whats up with that? Also what classinch is the hitch rated at?

asked by: Christian G

0

Expert Reply:

I will start with the question about the maximum tongue weight. Per Torklift, the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2", part # 306-X7286, has a maximum tongue weight of 300lbs.

Now whether your 2012 Honda Fit can handle a 4 bike platform rack depends on the weight of the rack, the weight of the bikes your are transporting, and if their total weight is less than the maximum tongue weight of your hitch receiver. My recommendation will give you the most flexibility with regards to transporting bikes.

I recommend using the Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Metallic Black, part # NV22B, and the 2-Bike Add-On for Kuat NV 2.0 Base Bike Rack for 2" Hitches - Aluminum - Matte Black, part # BA02B. I like this setup because you can turn this into a four bike hitch rack but you always have the option of using it as a two bike hitch rack. This rack has an anti-rattle hitch bolt that eliminates movement between the hitch receiver and the the rack. This will also lock the rack to the vehicle. It has a tilt-down mast, that work whether the rack has bikes on it or is empty, so you can access the rear of your vehicle. The rack is secured by the wheels, so the rack never touches the frames of your bikes.

I have included product description links and a video review link below.

expert reply by: Mark Smith

0

Answer 1

The EcoHitch Hidden Trailer Hitch Receiver part #306-X7286 is an excellent option for a 2013 Honda Fit, it's the only one with a 2" receiver tube opening in fact. In regards to trimming, this will be very minor. I have attached a photo that…

view full answer...

Answer 2

I checked with Torklift and their website does say item #306-X7286 has a 300 lbs tongue weight capacity. However, everything I can see online shows the 2012 Fit having a maximum 200 lbs tongue weight capacity. This is common amongst smaller cars. The…

view full answer...

Answer 3

To carry three bikes on your 2013 Honda Fit, you need a special Class III hitch receiver like the EcoHitch #306-X7286. This one is a little bit pricier and harder to install, but it allows you to carry more bikes and has a 2" hitch receiver.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...