Tekonsha Brake Controller TK5906 Review Video

The reason some ball mounts have different lengths is simply to allow for more clearance between the tow vehicle and trailer. Some people like a longer ball mount if, for example, they want to be able to open the tailgate of their truck when the…

I did some checking and it looks like your 2007 Mercury Mountaineer has a towing capacity of 3,500 lbs. You would need to check your owners manual or with Mercury to verify this based on how the vehicle is equipped. We have hitches like the Draw Tite…

Actually, both of the hitches we offer for a 2006 Ford Explorer are designed to mount below a factory hitch with a Class II 1-1/4 inch opening. I recommend the Draw-Tite Class III Round Tube Trailer Hitch, item #75437, because it will do exactly as…

We have the adjustable ball mount #MD204 which has both a 2 inch and a 2-5/16 inch balls. It also provides up to 4 inches of rise or drop.

I had our warehouse measure the BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch - 4" Drop/Rise - 14,000 lbs #MD204 you were looking at and from where the gusset meets the shank to the center of the closest hitch pin hole is…

To level a tandem trailer with the #EZ-JACK you will only need one set of the levelers. For the chocks part #RR-WC-2 you would only need one set of them as well. I attached a picture that shows the EZ-JACK being used on a tandem axle trailer.

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

The manufacturer didn't have a build sheet for the #3371802225 ball mount they could provide me, but I was able to get the particular measurement you were seeking. The distance from the center of the hitch pin hole to the beginning of the welded…

The Bulldog Winch Hitch Mount Storage Bracket #BDW20154 is meant to just hold a winch on a hitch mounted winch mount. It isn't meant to be used while using the winch or as an attachment point itself. What you could do though is weld on a combo…

The connector is gray in color, and should be located next to or behind the diagnostic port under the steering column, as you can see in the install video I'll link for you. You'll also need the #3035-P brake controller wiring adapter. One…

The Tekonsha Prodigy P3 Trailer Brake Controller part #90195 is an excellent option that can be transferred to multiple different vehicles when used with the correct wiring harness adapter. That said, you'll also want to install the Replacement…

BulletProof Hitches does not follow the standard measurement like everyone else, which is why you're seeing a difference on the #MD204. This has caused quite a bit of confusion over time. Rise is the distance from the top of the shank to the top…