Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2013 Toyota Highlander Video

To wire your 2013 Highlander with a 7-way and 4 pole connector, you'd first need a functional 4-pole trailer connector. If your Highlander doesn't already have one, you can install it using part #118449. With the 4-pole in place, there's…

Some 5-Pole flat connectors use a total of 6 wires. They operate as follows: Blue - trailer brakes Green - right hand brake and turn signals Yellow - left hand brake and turn signals Brown/Green - right hand running lights Brown/Yellow - left hand…

I would be happy to help you set up your 2013 Toyota Highlander for towing. I will start by confirming that the etrailer Trailer Hitch Receiver item #e98858 does fit your Highlander. Since you do not have any vehicle connectors at the rear of your…

The only way to really know if your 2010 Toyota Highlander has the factory tow package or not is to contact your local Toyota dealer with your VIN and they can let you know. Aside from that the only thing I could really find in searching online is…

You will need the Curt Class III Round Tube Trailer Hitch, item #13534, and with the tow package you will need the T-One Connector Wiring Harness with 4 Pole Trailer Connector - Toyota Highlander, item #118449. I would go ahead and install the 7-Way…

Luckily, rather than trying to understand the VIN check, the easiest way to determine if your Highlander is equipped with the taillight converter is to get a quick peek at the 10-pin connector it would plug into. The connector is located under the…

Yes, the Hopkins 4-way part #HM11141825 that you referenced will simply plug right into the port at the rear of your 2018 Toyota Highlander and then you'd be ready to go. I attached a picture of where you'll find the port at for the harness…

If you want to install the Tekonsha PRODIGY Brake Controller in your Highlander and you have the factory 4-pole, you will still need to wire your vehicle for the brake controller. Installation kit, item #ETBC7, will include everything you need,…

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

The Curt T-Connector Vehicle Wiring Harness, #56042, is the confirmed wiring harness for the 2010 Toyota Highlander with factory tow package installed. The factory tow package will include a power converter that would have been installed under the…

Basically what it boils down to is that if you have the tow package you'll already have a 4-Way trailer wiring connector on your 2019 Toyota Highlander so if you don't already have one odds are you need a wiring kit with the converter like…

The Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Flat Connectors #HM11143910 is not a fit for your 2009 Toyota Highlander Hybrid. It is a custom fit for 2008 to 2013 Lexus LX 570 models only. For your…