What is the Difference Between the Redarc Tow Pro Elite V2 and v3

Question

Question:

Whats the difference between part # 331-EBRH-ACCV2 and part # RED44FR

asked by: Max

0

Expert Reply:

The # RED44FR is the 331-EBRH-ACCV3, which is the 3rd version of the Redarc Tow Pro Elite controller that was originally only available in Australia; the # 331-EBRH-ACCV2 is the 2nd version and has been phased out. They're really mostly the same controller and there aren't any functional changes made between the two aside from the smaller knob on the V3 # RED44FR.

I've linked a video review of this controller for you to check out, but even though one is newer the updates were mostly cosmetic.

expert reply by: Erik B

0

Answer 1

The only difference between the 2nd and 3rd versions of the Redarc Tow Pro Elite is size of the control knob, with no functional changes being made. The Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR (version 3) has a smaller knob, adding…

view full answer...

Answer 2

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 3

Yes, the TPH-006 wiring harness is the same as the Plug-and-Play Wiring Harness #RED87FR we have on our site.

view full answer...

Answer 4

For your 2014 Jeep Wrangler Unlimited with factory tow package, I recommend the Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter #HM40975-11933. This kit gives you the wiring adapter you were asking…

view full answer...

Answer 5

For your 2009 Jeep Wrangler Unlimited with a factory 4-way trailer wiring harness the Pollak 7-Way and 4-Way part #HM40975-11933 that you referenced would be exactly what you'd need. This will replace the 4-way you have now and give you a…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 7

To wire the 4 clearance lights #MCL0040ABB, license plate light #M298C, and tail lights #STL190RB to your 12' long 75" wide vintage trailer, I recommend starting the 4-Way Wishbone Trailer Wiring Harness with 42" Ground Wire #A40W42B…

view full answer...

Answer 8

Yes, trailer wiring harness #C56332 does have a fuse in a red holder near the large black converter box. If that fuse is fine, then use the vehicle owner's manual to find any fuses related to tow package wiring on the vehicle to check them. If…

view full answer...

Answer 9

Most if not all trailer wiring harnesses/connectors use larger wires for the 12 volt and ground circuits compared to the other circuits (lights). The sockets themselves don't have an amperage rating so you will go by the draw of the things…

view full answer...

Answer 10

On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left…

view full answer...

Answer 11

To protect the 12 volt accessory power supply circuit, we recommend using a 40 amp inline circuit breaker, part number 9510.

view full answer...

Answer 12

If you are installing a 7-way and brake controller you will want to use a circuit breaker in-line when connecting the Black wire from the 7-way to the battery and in-line from the brake controller to the battery. The Black wire will draw 12 volt…

view full answer...

What is the Difference Between the Redarc Tow Pro Elite V2 and v3

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching