What Fuse Rating is Needed to Protect the 12 Volt Accessory Power Cirucit on a 7-Way Connector?

Question

Question:

for the 12v power going to the trailer,i used 12 awg wire. what size fuse would be correct to use? thanks!

asked by: vernon d

0

Expert Reply:

To protect the 12 volt accessory power supply circuit, we recommend using a 40 amp inline circuit breaker, part number 9510.

expert reply by: Mike L

0

Answer 1

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 2

Yes! We have both a hitch and wiring for your 2024 Toyota Grand Highlander. Hitch - Curt Trailer Hitch Receiver #C26VV Wiring - #C59236 If you are planning to do any towing, you can add the etrailer Ball Mount Kit #989900 to round out a tow package.

view full answer...

Answer 3

To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. The Curt item #C26VV is a class III hitch with a 2" receiver. It…

view full answer...

Answer 4

Since your 2024 Toyota Grand Highlander doesn't come with the factory tow package you need the Curt T-Connector Vehicle Wiring Harness #C79VV. The module plugs into that 10-Pin connector you found under the cup holder and then the 4-Way harness…

view full answer...

Answer 5

The Optronics 7-Way Connector - Trailer End #A7WCB will handle 8-gauge wires on the positive and negative connectors. If you want the same gauge wire on the vehicle side, I recommend the Hopkins Endurance 7-Way Trailer Connector Socket - Vehicle End…

view full answer...

Answer 6

Yes, it does. I checked with Curt and their item #C26VV hitch is confirmed to fit the 2024 Toyota Grand Highlander Hybrid.

view full answer...

Answer 7

Yes, it will. We've sold a few of these and have heard back from some of our customers that have said the Curt Hitch item #C26VV does not affect the functionality of the kick sensor. What typically happens in situations like this is you lose the…

view full answer...

Answer 8

The Curt Trailer Hitch Receiver #C26VV fits your 2024 Toyota Grand Highlander. This gives you a 2" receiver opening allowing for a large selection of hitch mounted accessories and ball mounts. I recommend installing the Curt Curt Powered Tail…

view full answer...

Answer 9

Most if not all trailer wiring harnesses/connectors use larger wires for the 12 volt and ground circuits compared to the other circuits (lights). The sockets themselves don't have an amperage rating so you will go by the draw of the things…

view full answer...

Answer 10

On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left…

view full answer...

Answer 11

Yes, trailer wiring harness #C56332 does have a fuse in a red holder near the large black converter box. If that fuse is fine, then use the vehicle owner's manual to find any fuses related to tow package wiring on the vehicle to check them. If…

view full answer...

Answer 12

If you are installing a 7-way and brake controller you will want to use a circuit breaker in-line when connecting the Black wire from the 7-way to the battery and in-line from the brake controller to the battery. The Black wire will draw 12 volt…

view full answer...

What Fuse Rating is Needed to Protect the 12 Volt Accessory Power Cirucit on a 7-Way Connector?

Products Referenced in This Question

Continue Researching