Redarc Plug-and-Play Wiring Harness TPH-006 Availability

Question

Question:

Do you offer part TPH-006? BRAKE CONTROLLER HARNESS

asked by: David M

0

Expert Reply:

Yes, the TPH-006 wiring harness is the same as the Plug-and-Play Wiring Harness # RED87FR we have on our site.

expert reply by: Jon G

0

Answer 1

The #RED44FR is the 331-EBRH-ACCV3, which is the 3rd version of the Redarc Tow Pro Elite controller that was originally only available in Australia; the #331-EBRH-ACCV2 is the 2nd version and has been phased out. They're really mostly the same…

view full answer...

Answer 2

Yes, there is a wiring adaptor for your 2021 Ford Explorer ST with the factory 7-way that will plug directly into your cars wiring harness without any splicing. The great thing about the Redarc Tow-Pro is they have a few options for plug and play but…

view full answer...

Answer 3

Yes the install harness part #RED87FR that you referenced is the correct install harness for the Redarc Tow Pro Elite #RED44FR in your 2020 Ford F-150.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

Hey Jeremy, Typically with boat trailers the manufacturer will install hydraulic surge brakes because you don't have to worry about the water damaging wires like you would with electric brakes. That being said, if you use a heat shrink butt…

view full answer...

Answer 8

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 9

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 10

I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR for your 2023 Toyota Tacoma with the factory tow package. You will be able to connect the wiring using the Redarc Adapter #RED99FR directly to the factory connector. We also have the…

view full answer...

Answer 11

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 12

Yes, when installing the knob for the Redarc Tow-Pro Liberty Brake Controller item #RED24FR you will want to remove any extra material behind the insert. I am happy the video was able to help you out. I have linked a couple of pictures from the video…

view full answer...

Redarc Plug-and-Play Wiring Harness TPH-006 Availability

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching