How Much Does etrailer # e98901 Hitch Weigh?

Question

Question:

Can you please advise what the weight of the etrailer Trailer Hitch Receiver Part No.: e98901. I couldnt find the weight of the part mentioned in the specification.

asked by: Nicholas D

1

Helpful Expert Reply:

I did some digging around and could not find the exact weight. I can tell you that the shipping weight is 29 pounds and I would think the packaging would be around 3 pounds. So, the best estimate would be 26 pounds.

expert reply by: Les D

1

Answer 1

Yes the etrailer hitch part #e98901 that you referenced does fit the 2020 Jeep Grand Cherokee Limited X. Then for trailer wiring you'd want the part #118727 and you'd be set in that regard as well.

view full answer...

Answer 2

When towing, you're always going to be limited by your lowest rated component. No matter what you do, you're only going to be able to tow what your vehicle's capacity will allow. The components you mentioned would be good…

view full answer...

Answer 3

Based on Jeep's website, the Grand Cherokee 3.6L in either 4x2 or 4x4 in the Limited or Sterling will handle that capacity. The Trailhawk and 4x4 Overland will also tow that 6,200 lb capacity. I recommend the trailer package for whatever…

view full answer...

Answer 4

The sticker on the Curt Trailer Hitch Receiver #C13182 is removable, but I strongly recommend against doing so. The sticker contains important information like the Tongue Weight (TW) and Gross Trailer Weight (GTW) ratings. Although I understand the…

view full answer...

Answer 5

Yes, the Curt hitch part #C13182 that you referenced is a confirmed fit for your 2017 Jeep Grand Cherokee Limited. I attached an install video for this hitch for you to check out as well. For trailer wiring you'd then want the part #118727.…

view full answer...

Answer 6

The square tube part #C13065 will be more hidden as it's cross-tube is up higher and the only thing that hangs down and is visible is just the hitch opening. I attached a picture that shows this hitch installed and you can see what I mean.…

view full answer...

Answer 7

The distance from the ground to the top of the inside edge on the Curt Trailer Hitch Receiver part #C13171 is 11-1/4" when we installed it on a 2017 Jeep Cherokee. The distance from the ground to the top of the inside edge on the Curt…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

How Much Does etrailer # e98901 Hitch Weigh?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching