Roadmaster EZ5 Base Plate Kit Installation - 2019 Jeep Grand Cherokee Video

There was a special harness from Jeep that was designed to address the problem you mentioned when flat towing the newer Cherokees like your 2019 Jeep Cherokee. Here recently they made updates to the vehicle to take care of it without requiring the…

I checked the owner's manual for your 2015 Jeep Grand Cherokee and found all of the locations you need to check that relate to the trailer lights. There are several so it is certainly possible that you missed a few but I don't see any relays.…

The trailer wiring harness I recommend for a 2019 Subaru Outback Wagon is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #118467 which features a direct plug-in-play installation. It provides a four way flat connection which…

According to the owners manual on the Jeep Grand Cherokee, the vehicle needs to be turned OFF, according to Step 13. I have attached a picture with the section in the owner's manual where it details the flat towing procedures that you'll need…

You will definitlely want the steering wheel to be unlocked when flat towing your 2019 Jeep Cherokee, but you will want to follow the specific steps outlined in the vehicle's owners manual for what needs to be done with the ignition and…

It sounds like you are looking for a base plate kit that is a fit for a 2018 Jeep Cherokee Trailhawk and if that is the case we have plenty of options. I however recommend using the etrailer Invisible Base Plate Kit part #e98952 which features a nice…

The cut out dimensions listed for the JR Products Switch part #37213815 are right at 3/4 inches wide by 1-1/2 inches tall that we measured when we had one out.

I checked with Lippert and the part number you mentioned corresponds with the Revolution Kwikee step and the replacement control module you need then is the part #LC363985.

I checked with Lippert and the part number you have of 1510000140 corresponds with the Revolution Kwikee step and the replacement control module you need then is the part #LC363985.

I checked with Lippert and the part number you mentioned corresponds with the Revolution Kwikee step and the replacement control module you need then is the part #LC363985.

The Curt T-Connector Vehicle Wiring Harness #C62VR will plug in line of the factory wiring harness on your 2021 Jeep Grand Cherokee. I have included a picture of the drivers side connections. The female connector from the Cherokee will plug into the…

It sounds like you're looking for the torque specs for the lug nuts on a 6,000 pound axle. For a hub with 1/2 inch studs, 90 to 95 foot-pounds is standard.