Does etrailer hitch # e98901 Fit 2020 Jeep Grand Cherokee Limited X

Question

Question:

Does the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2inch fit a 2020 Jeep grand Cherokee Limited X?

asked by: Nick H

0

Expert Reply:

Yes the etrailer hitch part # e98901 that you referenced does fit the 2020 Jeep Grand Cherokee Limited X.

Then for trailer wiring you'd want the part # 118727 and you'd be set in that regard as well.

expert reply by: Jameson C

0

Answer 1

Yes, for your 2020 Jeep Grand Cherokee we have the Tekonsha T-One Vehicle Wiring Harness #118727 that will work perfectly. This custom harness will plug into factory ports behind the driver and passenger tail lights on the Jeep and then you will…

view full answer...

Answer 2

For your 2020 Jeep Grand Cherokee the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118727 will be the solution for you. The included video is a great resource to get you started. In addition to the wiring, a great hitch for your…

view full answer...

Answer 3

I can confirm for you that yes, your 2020 Jeep Grand Cherokee Limited is compatible with the etrailer Trailer Hitch Receiver #e98901. The accompanying photo shows this hitch installed on a '20 Grand Cherokee so you can see how it will look…

view full answer...

Answer 4

To connect your vehicle that has a 4-Way flat connector to your trailer that has a 7-Way connector, you will need to install a 7-Way on the rear of your vehicle. If you just want or need the tail light functions to operate on your trailer you will…

view full answer...

Answer 5

When towing, you're always going to be limited by your lowest rated component. No matter what you do, you're only going to be able to tow what your vehicle's capacity will allow. The components you mentioned would be good additions for…

view full answer...

Answer 6

Based on Jeep's website, the Grand Cherokee 3.6L in either 4x2 or 4x4 in the Limited or Sterling will handle that capacity. The Trailhawk and 4x4 Overland will also tow that 6,200 lb capacity. I recommend the trailer package for whatever model…

view full answer...

Answer 7

Yes, the Curt hitch part #C13182 that you referenced is a confirmed fit for your 2017 Jeep Grand Cherokee Limited. I attached an install video for this hitch for you to check out as well. For trailer wiring you'd then want the part #118727. If…

view full answer...

Answer 8

I did some digging around and could not find the exact weight. I can tell you that the shipping weight is 29 pounds and I would think the packaging would be around 3 pounds. So, the best estimate would be 26 pounds.

view full answer...

Answer 9

The square tube part #C13065 will be more hidden as it's cross-tube is up higher and the only thing that hangs down and is visible is just the hitch opening. I attached a picture that shows this hitch installed and you can see what I mean. The…

view full answer...

Answer 10

The sticker on the Curt Trailer Hitch Receiver #C13182 is removable, but I strongly recommend against doing so. The sticker contains important information like the Tongue Weight (TW) and Gross Trailer Weight (GTW) ratings. Although I understand the…

view full answer...

Answer 11

The distance from the ground to the top of the inside edge on the Curt Trailer Hitch Receiver part #C13171 is 11-1/4" when we installed it on a 2017 Jeep Cherokee. The distance from the ground to the top of the inside edge on the Curt Trailer…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Does etrailer hitch # e98901 Fit 2020 Jeep Grand Cherokee Limited X

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching