Hitch for 2019 Toyota Highlander That Doesnt Extend Rearward From Bumper
Question:
Im looking for a hitch for a 2019 Toyota Highlander V6 AWD. Does the Curt C13394 stick out past the bumper? There are few pictures so I cant tell.
asked by: Charles
Expert Reply:
I have attached a video of the installation of this hitch on a 2019 Toyota Highlander. This will give you the best views of the Curt Hitch # C13394 on a Highlander like yours. It appears in the video that the hitch receiver is actually a bit recessed behind the bumper. It does not stick out at all.
I would also take a look at the etrailer brand trailer hitch # e98844. When we installed this hitch, we found the face of the receiver on this hitch sits perfectly even with the furthest rearward edge of the bumper, as shown in the provided photo.
For a trailer wiring harness, I'd recommend the Tekonsha # 118449. The trailer connector is actually intended to be stored in the cargo area until its needed, which is actually a good thing as it protects the connector from the elements and from being damaged so not having the mounting tab for the trailer connector wouldn't be a problem. The gasket/weatherstrip on the rear hatch is pliable enough that it won't damage the wires of the harness as long as you keep the wires away from the latch. I used a trailer connector exactly the same way for years with my PWC trailer and never had a problem.
For a ball mount, I'd recommend # C45010 and for a trailer ball, part # 19260 for a 1-7/8 inch or # 63845 for a 2 inch. I'll link to install videos for the hitch and wiring harness I recommended.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Visible Cross Tube
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Wiring
- Article: My Trailer Hitch Doesn't Fit
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Search Results: hitch extender
- Shop: Kuat Magnetic Hitch Receiver Reducer Sleeve - 2-1/2" to 2" Hitch - 6-1/4" Long
- Search Results: thule 9025
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
- Video: Curt Multipurpose Ball Mount Review
- Video: RockyMounts Hitch Adapters - Hitch Extender - RKY10008 Review
- Video: etrailer Class III Trailer Hitch Installation - 2015 Hyundai Tucson
- Video: etrailer.com Trailer Hitch Installation - 2019 Toyota Highlander
- Q&A: Does Thule Apex XT Bike Rack Fit Trailer Hitch With Hitch Pin Hole 1-1/2 Inches Deep
- Q&A: Trailer Hitch Adapter to use Thule DoubleTrack Bike Rack
- Search Results: trailer hitch wiring
- Search Results: c56217
- Article: Which Hitches are Made in the USA
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Search Results: weight distribution system
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: 5 Things to Know About Weight Distribution Hitches
- Video: Trailer Hitch Installation - 2016 Toyota Highlander - Curt
- Video: Trailer Hitch Installation - 2018 Toyota Highlander - Curt
- Video: Trailer Wiring Harness Installation - 2018 Toyota Highlander C56217
- Q&A: Which Fuse is Used in Install of Tow Ready # 118449 Trailer Wiring Harness on 2015 Toyota Highlander
- Q&A: Hitch that Fits 2019 Toyota Highlander