Removing or Trimming the Underbody Panel on a 2014 Toyota Highlander for a Curt Trailer Hitch

Question

Question:

Do the instructions include how to trim panel?

asked by: Ron H

1

Helpful Expert Reply:

The installation instruction for the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13394, which I have linked, shows how much of the panel is trimmed. The installation video that I have attached will show you exactly how it is done.

expert reply by: John H

1

Answer 1

The Highlander or 4 Runners that have towing packages come with the hitch receiver and the wiring most of the time. They do not come with a ball mount however. Based on what you need to tow, you may find it less expensive to get a base version and…

view full answer...

Answer 2

I'm happy to help you get what you need for towing. I did a little research to find your 2017 Toyota Highlander SLE AWD towing capacity to be 5,000 lbs. Based on that, you will not have an issue with a 3,850 lb travel trailer with 400 lb tongue…

view full answer...

Answer 3

Yes, the Hopkins 4-way part #HM11141825 that you referenced will simply plug right into the port at the rear of your 2018 Toyota Highlander and then you'd be ready to go. I attached a picture of where you'll find the port at for the harness…

view full answer...

Answer 4

Use the 10 amp fuse. It's okay to use a lower-rated fuse than what the vehicle manufacturer recommends, but you can't use a higher rated fuse. I spoke with my Tow Ready representative, and confirmed that the installation instructions for the…

view full answer...

Answer 5

You want the best, because there can be only one. But the best depends on what you're using it for or what appeals to you. Basically, I've narrowed it down to two options. The best for actual use is the etrailer Hitch #e98844 because if…

view full answer...

Answer 6

The trailer hitch I highly recommend for your 2019 Toyota Highlander XLE Hybrid is the EcoHitch Trailer Hitch Receiver #306-X7250 because it offers a concealed crosstube so your Highlander keeps a clean look. I have added a link to a video install of…

view full answer...

Answer 7

For your 2019 Toyota Highlander with a full size spare the trailer hitch I recommend is the Curt part #13394 allows your full size spare as long as it is not on the aluminum rim. This is the same for the other hitches that fit your Highlander. The…

view full answer...

Answer 8

The Curt Class III, part #C99FR is a confirmed fit for your Highlander. The hitch will fit models with an 18" or smaller spare tire under vehicle; larger spare tires will not be able to be stored under the vehicle once the hitch is installed. If…

view full answer...

Answer 9

The etrailer hitch #e98844 is my recommendation for your 2019 Toyota Highlander. Because of that I think it's the obvious choice for your Highlander. It has an attractive black matte finish, a great towing capacity, and can be used with a weight…

view full answer...

Answer 10

The Curt #C13394 has a very resilient powdercoat and it's made in the USA. It fits great and will work with your spare as long as it is not the Aluminum rim. The aluminum rim is too wide.

view full answer...

Answer 11

I have attached a video of the installation of this hitch on a 2019 Toyota Highlander. This will give you the best views of the Curt Hitch #C13394 on a Highlander like yours. It appears in the video that the hitch receiver is actually a bit recessed…

view full answer...

Answer 12

You are right that the EcoHitch #306-X7250 for your 2019 Toyota Highlander features a hidden crosstube design that works to maintain a clean, factory-like appearance at the rear of your vehicle. It does cost significantly more than the other hitches,…

view full answer...