Trailer Hitch for a 2020 Mini Countryman

Question

Question:

Will this fit a 2020 Mini Countryman? Also, do you have installation instructions?

asked by: Joe

0

Expert Reply:

I called Torklift on your behalf to inquire about an EcoHitch fit for the 2020 Mini Countryman. They have not confirmed a fit for your vehicle, but we do have a hitch for you.

It's the Curt Class I, part # C11522. This hitch has a 1-1/4" receiver and features a concealed cross tube with a gross trailer weight of 2000 lbs and a gross tongue weight of 200 lbs. Installation instructions come with this hitch and are also linked below.

expert reply by: Kef G

0

Answer 1

Thanks for reaching out, Mark! The correct trailer hitch to fit your 2019 Mini Countryman SE All4 Plug-In Hybrid is the EcoHitch Hidden Trailer Hitch Receiver #306-X7387. EcoHitch has confirmed that this will work on the Hybrid versions of your…

view full answer...

Answer 2

The EcoHitch #306-X7387 is specifically designed for the 2019 Mini Countryman, it won't fit any other vehicles. Also, from looking at the installation instructions, it looks like there are some cutting and modifications necessary for the…

view full answer...

Answer 3

I have a solution for you, but the EcoHitch #306-X7387 is not a confirmed fit on the 2019 Mini Countryman John Cooper Works Edition. However, the Curt #C11522 is a confirmed fit on the John Cooper Works edition of the Countryman and will also give…

view full answer...

Answer 4

I have another option for you, but the #306-X7387 you were looking at is only confirmed to fit the 2019 Countryman. For your 2018 Mini Cooper Countryman AWD you will need to go with the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"…

view full answer...

Answer 5

To connect back up lights you need to have a 7-way trailer connector on both your trailer and tow vehicle. On a 7-way the reverse lights are powered by the center pin. To connect reverse lights to the trailer's 7-way you can use 16 gauge wire…

view full answer...

Answer 6

Yes, the #HM40975 that you referenced will fit the connector in your picture. The picture is pretty blurry though. So if you are needing to replace that harness as well the part #HM40975-11998 comes with the connector with wires that could get…

view full answer...

Answer 7

The EcoHitch Hidden Trailer Hitch Receiver part #306-X7387 which is a fit for your 2018 Mini Countryman has a tongue weight capacity of 300 lbs therefore the weight of the bike rack and four bikes cannot exceed 300 lbs. In regards to installation,…

view full answer...

Answer 8

I definitely recommend a platform rack for electric bikes so you do not have to lift the heavy bikes as far to get them on the rack. For a platform rack, I recommend the RockyMounts MonoRail 2 Bike Platform Rack #RKY10003 which is designed to carry 2…

view full answer...

Answer 9

There may be a combination of the Curt Trailer Hitch Receiver, Item #C11522, with a draw bar like the Curt Drawbar - 5 inch Rise, Item #C45014, that will get you the right ball height. To find what you need, start by measuring from the ground to the…

view full answer...

Answer 10

The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #C11522 will not require any trimming of the rear bumper diffuser on your 2018 Mini Countryman. I've attached a photo of the installed hitch for you and have also included the…

view full answer...

Answer 11

One of my contacts at Curt Manufacturing advised me that, the Curt Trailer Hitch Receiver Custom Item #C11522 is compatible with the automatic tailgate sensors on the 2018 Mini Countryman. This trailer hitch is perfect for light-duty towing, this…

view full answer...

Answer 12

The Yakima FullBack 2 Trunk Mount Bike Rack #Y02634 is arguably my favorite trunk mount rack and will fit your 2022 Mini Countryman. With that being said, the best way to any damage to your Countryman is to use a hitch bike rack. The FullBack…

view full answer...