Will the EcoHitch 306-X7387 Fit a John Cooper Works Edition 2019 Mini Countryman

Question

Question:

Good morning Could you confirm if this hitch will fit the John Cooper Works Countryman Many thanks

asked by: Trevan S

0

Expert Reply:

I have a solution for you, but the EcoHitch # 306-X7387 is not a confirmed fit on the 2019 Mini Countryman John Cooper Works Edition. However, the Curt # C11522 is a confirmed fit on the John Cooper Works edition of the Countryman and will also give you a 1-1/4" hitch on your Mini Countryman.

expert reply by: Erik B

0

Answer 1

The EcoHitch #306-X7387 is specifically designed for the 2019 Mini Countryman, it won't fit any other vehicles. Also, from looking at the installation instructions, it looks like there are some cutting and modifications necessary for the…

view full answer...

Answer 2

I called Torklift on your behalf to inquire about an EcoHitch fit for the 2020 Mini Countryman. They have not confirmed a fit for your vehicle, but we do have a hitch for you. It's the Curt Class I, part #C11522. This hitch has a 1-1/4"…

view full answer...

Answer 3

Yes, the #HM40975 that you referenced will fit the connector in your picture. The picture is pretty blurry though. So if you are needing to replace that harness as well the part #HM40975-11998 comes with the connector with wires that could get…

view full answer...

Answer 4

I have another option for you, but the #306-X7387 you were looking at is only confirmed to fit the 2019 Countryman. For your 2018 Mini Cooper Countryman AWD you will need to go with the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"…

view full answer...

Answer 5

To connect back up lights you need to have a 7-way trailer connector on both your trailer and tow vehicle. On a 7-way the reverse lights are powered by the center pin. To connect reverse lights to the trailer's 7-way you can use 16 gauge wire…

view full answer...

Answer 6

Vehicle owners are protected when installing aftermarket items on their vehicles by the Federal Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty cannot be voided. I…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Will the EcoHitch 306-X7387 Fit a John Cooper Works Edition 2019 Mini Countryman

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching