Can I Use the PX1309SS Hub Cap Covers on a 16 Wheel on 1968 C20 Truck

Question

Question:

Part number PX1309SS - I was checking these out and a customer commented that these fit his 66 C20 truck. Kyle on 4/10/20 commented "Worked well on my 66 Chevy C20. Has 8 lug GM wheels. Worried that the caps wouldnt clear the Eaton HO52 rear hubs, but they cleared, and look great. Chrome isnt what id consider chrome, more like polished stainless. Not bad overall" I have a 68 C20 with 16inch wheel - bolt pattern 8 on 6.5 see pic. Will these fit? They would be perfect!

asked by: Jim M

0

Expert Reply:

Yes. The Phoenix USA Baby Moon Hub Cover - 12" Diameter - Stainless Steel # PX1309SS is designed to work on 16" conventional wheels, so these will be a fit for your 1968 C20 with 16" wheels.

expert reply by: Erik B

0

click to enlarge

Answer 1

We do have exactly what you are looking for, hubcaps that fit 16 inch trailer wheels that have 8 lugs; what you need is the following: - Phoenix USA Baby Moon Hubcap #PX1309SS These fit 16" conventional wheels that have a 6 on 5-1/2" or 8…

view full answer...

Answer 2

Appreciate the purchase, and there is a hubcap option that fits the Dexstar Conventional Steel Wheel - 16" x 6" Rim - 6 on 5-1/2 - Black Powder Coat #AM20758: - Phoenix USA Baby Moon Hubcap - Stainless Steel #PX1309SS

view full answer...

Answer 3

You can measure the diameter of the wheel and the diameter of the baby moon mounting ridge on the wheel if you care to (see photo), but because the Dexstar Conventional Steel Wheel you have is a standard automotive size, you can simply purchase…

view full answer...

Answer 4

The baby moon cover is designed to fit 13, 14, and 15 inch conventional wheels with 5 lug patterns. If your 13 inch wheel was designed to fit a baby moon cover that is 9-1/4 inches across the part #AM90086 would work well for you regardless of your…

view full answer...

Answer 5

The best option we have for a vintage style hub cap is the Americana Baby Moon Trailer Wheel Center Cap part #AM90086 which is specific to the Dexstar Conventional Steel Wheel part #AM20766. I could not confirm fit of any other style hub cap for this…

view full answer...

Answer 6

The overall diameter of the baby moon cover part #PX1309SS is 12 inches and the inner diameter is 11-15/16 inch.

view full answer...

Answer 7

I did some looking around and it looks like we only have baby moon hubcaps that would work on as large as 16" diameter wheels, like the Phoenix USA Baby Moon Hub Cover 12" Diameter #PX1309SS. I've linked our entire selection of baby…

view full answer...

Answer 8

The Dexstar Conventional Steel Wheel #AM20766 will accept the Phoenix USA Baby Moon Hubcap #PX1309SS without modification. This hub cap is stainless steel so it will not flake or peel like some chrome hub caps.

view full answer...

Answer 9

Do you see the three raised bumps on the center circle section of your wheel? That's where a baby moon like the part #AM90086 fits over. You need to measure that diameter. If it's right at 9-1/4 inch this cover is what you'd need.

view full answer...

Answer 10

Yes. The nubs on the wheel are simply to hold the Phoenix USA Baby Moon Hubcaps #PX1309SS into place, so the 4th nub will just give you one more spot where they're holding these into place. For this reason they'll work just fine on your…

view full answer...

Answer 11

The Dexstar Conventional Steel Wheel 16" 8 Lug part #AM20766 is only offered with an offset, +.5" to be exact. The majority of the conventional style that accept the baby moon hubcaps part #PX1309SS have an offset. That said, if you're…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Can I Use the PX1309SS Hub Cap Covers on a 16 Wheel on 1968 C20 Truck

Product Page this Question was Asked From

Continue Researching