Baby Moon Hubcap Compatible With Dexstar Conventional Steel Wheel # AM20766

Question

Question:

Does the above rim need to be modified in any way to utilize the hub caps/baby moons you all sell? Thank you

asked by: Robert H

0

Expert Reply:

The Dexstar Conventional Steel Wheel # AM20766 will accept the Phoenix USA Baby Moon Hubcap # PX1309SS without modification. This hub cap is stainless steel so it will not flake or peel like some chrome hub caps.

expert reply by: Bud M

0

Answer 1

The #PX1309SS Phoenix USA Baby Moon hub caps are compatible with the #AM20766 Dexstar 16 inch conventional steel wheel you referenced. This being said, we sell these wheels as trailer wheels. They aren't intended for use on a passenger vehicle.

view full answer...

Answer 2

You can measure the diameter of the wheel and the diameter of the baby moon mounting ridge on the wheel if you care to (see photo), but because the Dexstar Conventional Steel Wheel you have is a standard automotive size, you can simply purchase…

view full answer...

Answer 3

For the Dexstar Conventional Steel Wheel part #AM20766 that you are interested in we do not carry any babymoon covers that would fit but we do have more traditional hub covers like the part #PXQT865CHN.

view full answer...

Answer 4

We do have exactly what you are looking for, hubcaps that fit 16 inch trailer wheels that have 8 lugs; what you need is the following: - Phoenix USA Baby Moon Hubcap #PX1309SS These fit 16" conventional wheels that have a 6 on 5-1/2" or 8…

view full answer...

Answer 5

Yes, the 7-way trailer connector part #118272 which is a confirmed fit for your 2017 Ford Explorer will be fully functional.

view full answer...

Answer 6

The Dexstar Conventional Steel Wheel 16" 8 Lug part #AM20766 is only offered with an offset, +.5" to be exact. The majority of the conventional style that accept the baby moon hubcaps part #PX1309SS have an offset. That said, if you're…

view full answer...

Answer 7

According to my Tekonsha contact, your Explorer should have a brake controller connector, it would be located behind the handle for the hood release. You'll need the #3035-P brake controller wiring adapter, which is compatible with Tekonsha brake…

view full answer...

Answer 8

The Dexstar Conventional Steel Wheel #AM20766 only comes in black but I may have another option for you. The Dexstar Steel Mini Mod Trailer Wheel #AM20759 is another 16 inch by 6 inch rim with an 8 on 6-1/2 bolt pattern and +.5 offset that has a…

view full answer...

Answer 9

I have a solution for you, but there aren't going to be any steps that will have a capacity of greater than 325-lbs that you're going to be able to use for something 52" off the ground. I'll also add that the TorkLift GlowStep…

view full answer...

Answer 10

We don't carry any conventional style wheels in any color other than black like #AM20766 you referenced. However we do have white wheels that will match that bolt pattern you may be interested in. For a powdered coated white, 16 inch trailer…

view full answer...

Answer 11

Yes. The Phoenix USA Baby Moon Hub Cover - 12" Diameter - Stainless Steel #PX1309SS is designed to work on 16" conventional wheels, so these will be a fit for your 1968 C20 with 16" wheels.

view full answer...

Answer 12

The overall diameter of the baby moon cover part #PX1309SS is 12 inches and the inner diameter is 11-15/16 inch.

view full answer...

Baby Moon Hubcap Compatible With Dexstar Conventional Steel Wheel # AM20766

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching