Baby Moon Hubcaps For 16 Inch Wheels With 8 Lugs

Question

Question:

I am trying to find baby moon hub caps for 16 in wheel with 8 lugs

asked by: Bill C

0

Expert Reply:

We do have exactly what you are looking for, hubcaps that fit 16 inch trailer wheels that have 8 lugs; what you need is the following:

- Phoenix USA Baby Moon Hubcap # PX1309SS

These fit 16" conventional wheels that have a 6 on 5-1/2" or 8 on 6-1/2" bolt pattern, and I have added a link below to a video review for you to check out as well.

expert reply by: Kyle S

0

Answer 1

The #PX1309SS Phoenix USA Baby Moon hub caps are compatible with the #AM20766 Dexstar 16 inch conventional steel wheel you referenced. This being said, we sell these wheels as trailer wheels. They aren't intended for use on a passenger vehicle.

view full answer...

Answer 2

I believe the wheel that they are refering to is the Dexstar Conventional Steel Wheel #AM20766. This has the same 8 on 6-1/2" lug pattern that the 1953 Chevrolet Advance Design Trucks had. This wheel is only 16" in diameter where the…

view full answer...

Answer 3

You could use the Americana Aluminum Split Spoke Trailer Wheels, #AM22659HWT, on your Silverado as long as the wheel will fit your tires and hubs and assuming everything remains under the weight capacities of your towing setup. This would include all…

view full answer...

Answer 4

Technically if the bolt pattern and weight ratings are compatible with your vehicle then you can fit trailer wheels on a car but the biggest problem you are going to have is proper tire placement. Vehicles use wheels with high positive offsets which…

view full answer...

Answer 5

The Americana Baby Moon Center Cap, #AM981306 is typically used for 15", 6-lug conventional wheels. I checked with my contact at Americana Tire and Wheel and he said that there are some 16" wheels that are also compatible with this hub cap.…

view full answer...

Answer 6

The 7.00-15LT tires you have on your 1978 Avion trailer have a 29.4" diameter, have a load range that should be in the 2,400 lb vicinity and fit wheels that are 5", 5-1/2" and 6". For comparable tires I recommend going with a…

view full answer...

Answer 7

That certainly does appear to be an oil bath hub. The seal number is associated with 1956 to 1959 Studebakers as far as I could find. It looks like the dimensions of the seal are 1.875 inches inner diameter and 3 inches outer diameter. We have one…

view full answer...

Answer 8

Yes. The Phoenix USA Baby Moon Hub Cover - 12" Diameter - Stainless Steel #PX1309SS is designed to work on 16" conventional wheels, so these will be a fit for your 1968 C20 with 16" wheels.

view full answer...

Answer 9

Appreciate the purchase, and there is a hubcap option that fits the Dexstar Conventional Steel Wheel - 16" x 6" Rim - 6 on 5-1/2 - Black Powder Coat #AM20758: - Phoenix USA Baby Moon Hubcap - Stainless Steel #PX1309SS

view full answer...

Answer 10

The best option we have for a vintage style hub cap is the Americana Baby Moon Trailer Wheel Center Cap part #AM90086 which is specific to the Dexstar Conventional Steel Wheel part #AM20766. I could not confirm fit of any other style hub cap for this…

view full answer...

Answer 11

The baby moon cover is designed to fit 13, 14, and 15 inch conventional wheels with 5 lug patterns. If your 13 inch wheel was designed to fit a baby moon cover that is 9-1/4 inches across the part #AM90086 would work well for you regardless of your…

view full answer...

Answer 12

You can measure the diameter of the wheel and the diameter of the baby moon mounting ridge on the wheel if you care to (see photo), but because the Dexstar Conventional Steel Wheel you have is a standard automotive size, you can simply purchase…

view full answer...

Baby Moon Hubcaps For 16 Inch Wheels With 8 Lugs

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching