Is Weight Distribution Hitch Needed for 2017 Dodge Grand Caravan Towing Pop-Up Camper
Question:
I have a 2017 dodge grand caravan and are looking to a buy a rockwood a frame pop up 17-21 foot camper that has a tongue weight of 250-350 do i need a sway bar and weight distribution bars and if so what kind. I will have jounce springs. Thanks for advise i want it right without problems. Thanks
asked by: Randall B
Helpful Expert Reply:
A weight distribution system is not required to tow with your 2017 Dodge Grand Caravan, though a system is recommended if your trailer weight is more than 50 percent of your vehicle's GVWR. Even a small pop-up is going to surpass the 50 percent mark of your Grand Caravan so I highly recommend a weight distribution system with sway control. This will not only keep you level but also greatly help you control your vehicle when towing.
For a system with up to a 350 lb tongue weight, the best option in terms of quality and value is the Fastway e2 Weight Distribution # FA92-00-0450.
This gives you two points of friction sway control for optimal handling, uses clamp-on brackets for an easier installation than systems that use chains, and allows you to back up with the system on, something that not all allow you to do. The Fastway is compatible with surge or electric brakes, and comes with everything you need to install, with the exception of the hitch ball. That will depend on the size of your trailer's coupler, though with a pop-up camper you will likely just need 2" Hitch Ball # 40038.
Your 2017 Dodge Grand Caravan will also need a trailer hitch receiver compatible with weight distribution and for that I recommend the hitch with the best bumper clearance, which is the etrailer Trailer Hitch Receiver # e98854.
To add a 4-way wiring harness to your '17 Grand Caravan the correct part is the Wiring Harness # C56331.
I have added links to video reviews and installs for you to check out as well.
Products Referenced in This Question
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- etrailer
more information >
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 4,500 lbs GTW, 450 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 200 lbs
- 300 lbs
- Fastway
more information >
Product Page this Question was Asked From
2" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1 Inch Diameter Shank
- 12000 lbs GTW
- Class III
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Search Results: rhino rack
- Shop: Roof Rack
- Video: Brophy Ball Mount Review EA20
- Video: Ignik FireCan Fire Pit Rocks Review
- Video: Curt Ball Mounts - Fixed Ball Mount - D-28 Review
- Q&A: Trailer Hitch Ball Wrench Size and Torque Rating for 1-1/4 Inch Hitch Ball Shank Size
- Q&A: What Size Wrench is Used to Tighten Curt 2 Inch Trailer Hitch Ball 40038
- Q&A: What Are the Torque Specs for the Curt 2" Hitch Ball
- Q&A: Recommended Portable Fire Pit That Works With The Ignik FireCan Fire Pit Rocks
- Shop: RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms - Fixed Mounting Points - Qty 6
- Shop: Fire Pit Rocks for Ignik FireCan Portable Propane Fire Pit
- Shop: Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
- Shop: Roof Rack Leg Spacer Blocks for Rhino-Rack Vortex Aero Crossbars - 5 mm Thick - Qty 2
- Shop: Brophy Ball Mount - 7" Rise, 8" Drop - 15-1/4" Long - Aluminum - 8,000 lbs
- Shop: Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick - Qty 2
- Article: Rooftop Cargo Carriers
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2
- Video: Rhino-Rack ROC25 Naked Roof Roof Rack Review
- Search Results: roof rack
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Rhino-Rack Camper Shell Aero Bar Roof Rack Review
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Review of Rhino Rack Ladder Racks - Truck Cap Ladder Rack - Y02-480B
- Shop: Brake Controller
- Search Results: crossbars
on Trailer Hitch Ball
